Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Touring83]

I am currently out of town for work, so I am not able to head to the garage and check myself. I was wondering what the stock riser size was for the 2013 CVO Road King. From what I understand, the stock handlebars are NOT stepped and go 1 1/4" all the way through. I know lots of other bars step down to 1" where they meet the risers. I found these handlebars, and it would be nice if I could throw em' on without also buying new risers. Thank you!

http://www.carlinidesign.com/Handlebars/Ape-Hangers/Evil-Ape/Evil-Ape-10-Chrome.html

[2k]

They are 1 1/4 all the way, but are NOT the set screw type. they use top caps with bolts. You could probably make them work, but maybe not. You might could drill and tap the top cap and put a set screw in it. But I'm a little confused.....you ask about motor upgrades for a 14 SERK and bar upgrades for a 13 SERK, do you have both?

[Touring83]

My fault, I was researching 2013 bars prior to posting to see if they were the same, and had that on my mind. I have a 2014.