Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 [2]  All

Author Topic: Help on removing bolt from primary cover  (Read 4069 times)

0 Members and 1 Guest are viewing this topic.

08glide

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1037
    • VA

    • CVO1: 2012 cvoseuc
    • CVO2: 08 sg 105 anniv
Re: Help on removing bolt from primary cover
« Reply #15 on: March 28, 2018, 11:11:23 AM »

as already stated, i think the key is to make sure you've got the right torx head. i've know several that thought it was a t-25 ( &it will feel like it fits) but it;s really a t-27. I also use a impact driver if one feels like it's not breaking loose. just don't over tighten(as already said, they're not under that mush pressure). I'd never use a thread locker on them. jmo
o
Logged
"Dream as if you'll live forever. Live as if you'll die today."  (James Dean)

Cat Eye

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1389


    • CVO1: 2015 FLHXSE
Re: Help on removing bolt from primary cover
« Reply #16 on: March 28, 2018, 04:42:04 PM »

as already stated, i think the key is to make sure you've got the right torx head. i've know several that thought it was a t-25 ( &it will feel like it fits) but it;s really a t-27. I also use a impact driver if one feels like it's not breaking loose. just don't over tighten(as already said, they're not under that mush pressure). I'd never use a thread locker on them. jmo
o
X2
And use a torque wrench to tighten to around 84-100 inch lbs
Logged
Pages: 1 [2]  All
 

Page created in 0.226 seconds with 25 queries.