Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: knock on cold motor  (Read 2640 times)

0 Members and 1 Guest are viewing this topic.

jimsfatboy2

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 58
knock on cold motor
« on: October 04, 2016, 02:26:57 AM »

when i first start my bike there is what sounds like an engine knocking coming from motor. It goes away after a couple minutes when it warms up. any thoughts or help?? I have hillside stage 3 heads, woods 777 cams, s&s adj pushrods, lifters, 5.3 injectors, and 55mm hpi throttle body
Logged

Ridgerunr

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 921
  • www.CVOHARLEY.com
    • TN

Re: knock on cold motor
« Reply #1 on: October 04, 2016, 08:24:29 AM »

What pistons? Could have a little piston slap.
Logged
2004 Roadglide 113" (sold)
2014 CVO RoadKing
2015 RGS

jimsfatboy2

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 58
Re: knock on cold motor
« Reply #2 on: October 04, 2016, 07:16:53 PM »

not sure, they came with s&s 106 big bore kit
Logged

Ridgerunr

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 921
  • www.CVOHARLEY.com
    • TN

Re: knock on cold motor
« Reply #3 on: October 05, 2016, 07:18:12 AM »

Ah the infamous 106". If this is one of the early ones, they had short skirts on the pistons. Using any oil?
Logged
2004 Roadglide 113" (sold)
2014 CVO RoadKing
2015 RGS

jimsfatboy2

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 58
Re: knock on cold motor
« Reply #4 on: October 05, 2016, 10:22:23 PM »

not that im aware of, i had them on for a year with andrews 54 cams before this and rode bike with new combination for 3 months before this happened
Logged

Unbalanced

  • FUD Examiner
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6710

    • CVO1: 2011 SESG,
    • CVO2: 2004 SEEG Pumpkin,
    • CVO3: 2002 Police Roadking, Maudie and Maybelle Slayer
Re: knock on cold motor
« Reply #5 on: October 05, 2016, 11:05:04 PM »

You might try and do a compression and leakdown test simple enough and may glean a lot of information from them.   
Logged
HBRR Florida Chapter,  STILL - The Fastest Chapter - Proven yet again Bikeweek 2017

jimsfatboy2

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 58
Re: knock on cold motor
« Reply #6 on: October 05, 2016, 11:56:38 PM »

i have no idea how to do that
Logged

jimsfatboy2

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 58
Re: knock on cold motor
« Reply #7 on: November 08, 2016, 09:30:43 PM »

so after doing a compression test i come to find front cylinder 120 psi, rear cylinder 200psi. I'm wondering what might cause this

Logged

FlaHeatWave

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2208

    • CVO1: '01 FXDWG2 RED 103 6sp
    • CVO2: '05 FLHTCSE2 CHERRY
    • CVO3: '09 FLTRSE3 YELLOW 117/DD7
Re: knock on cold motor
« Reply #8 on: November 09, 2016, 10:37:45 AM »

so after doing a compression test i come to find front cylinder 120 psi, rear cylinder 200psi. I'm wondering what might cause this

The issue can be narrowed down with a Leakdown Test, and / or a look with a Borescope, end result, going to have to pull the Heads anyway... Dust off the credit card :nervous:
Logged
"I've read dozens of books about heros and crooks, and learned much from both of their styles"

Unbalanced

  • FUD Examiner
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6710

    • CVO1: 2011 SESG,
    • CVO2: 2004 SEEG Pumpkin,
    • CVO3: 2002 Police Roadking, Maudie and Maybelle Slayer
Re: knock on cold motor
« Reply #9 on: November 09, 2016, 01:16:48 PM »

did you happen to note where the air sound was coming from on the cylinder with the leadkdown?
Logged
HBRR Florida Chapter,  STILL - The Fastest Chapter - Proven yet again Bikeweek 2017

jimsfatboy2

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 58
Re: knock on cold motor
« Reply #10 on: November 09, 2016, 06:35:02 PM »

havent got to leakdown test, have to do some research on how to do that
Logged
 

Page created in 0.217 seconds with 21 queries.