Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Dan_Lockwood]

Hi guys.

My Boardtrack Racer project has an Ultima 113" EVO style motor.

I'm getting ready to weld in my bungs for the oil tank and want to make sure I have the routing correct.

I have an oil filter adapter from an EVO motor that Jim provided me so graciously about 6 years ago.

Here's the line routing I found on the Internet.  Just want to make sure this is all I need.  It show the vent from just behind the oil pump on the crankcase being routed back to the tank.  On my Shovelhead I routed this back to the bottom of the bike than out into the air.  My oil tank is vented via the cap.  The way I have the right side FLH tank converted to an oil tank, it holds 6qts, but I'll only run with 5.  So there will be plenty of head room in the tank.

Thanks.