Topic: 2014 ultra starter dragging (Read 1174 times)

Newell Ron · « **on:** April 10, 2021, 05:18:57 PM »

New member here. Thought I'd ck y'all out. Got a problem with taking my bike to a shop so looking at you guys for an idea. New batt., new batt. cables new starter but (not everytime but most of the time ) the starter will drag the voltage down to nothing. It does start though. Usually if I bump the button first its ok then. Batt. shows 13+ stopped and 14.2 running. I can hear atleast one of the acr's click when I turn the switch on. This things got me buffaloed. 37k miles. Sure would appreciate ideas
Thanks again, Ronnie

ultra13 · « **Reply #1 on:** April 11, 2021, 08:50:37 AM »

You said you R2'd the starter. Does that include the starter clutch?

Newell Ron · « **Reply #2 on:** April 11, 2021, 11:00:40 AM »

Yep the whole assembly.

CVO Couple · « **Reply #3 on:** April 11, 2021, 05:34:21 PM »

Does the engine start turning over then hit a compression stroke and stop or almost stop then keep going and starts?

Sent from my iPhone using Tapatalk

Newell Ron · « **Reply #4 on:** April 11, 2021, 08:38:34 PM »

I fixed it !!!. (I think) lol
The ACRs were the only thing I could figure so I put a whole bottle of that concentrated seafoam injector cleaner in a full tank and ran the heck out of it out on I 10 . Its been working fine (knock on wood)..

ultra13 · « **Reply #5 on:** April 12, 2021, 12:27:42 PM »

SAAAWEET!

Newell Ron · « **Reply #6 on:** April 12, 2021, 02:37:58 PM »

Thanks. I appreciate the input.
Ronnie

Author Topic: 2014 ultra starter dragging (Read 1174 times)

Newell Ron

2014 ultra starter dragging

ultra13

Re: 2014 ultra starter dragging

Newell Ron

Re: 2014 ultra starter dragging

CVO Couple

Re: 2014 ultra starter dragging

Newell Ron

Re: 2014 ultra starter dragging

ultra13

Re: 2014 ultra starter dragging

Newell Ron

Re: 2014 ultra starter dragging