www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: 2012 CVO RoadGluide  (Read 1143 times)

0 Members and 2 Guests are viewing this topic.

Johnabbate

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • www.CVOHARLEY.com
    • CA

2012 CVO RoadGluide
« on: April 08, 2025, 03:22:23 PM »
I bought a 2012 CVO Roadgluid, it started blowing out white smoke and oil coming out of carburetor (air cleaner). The bike was originally a 110 but was bored out to 117. Can anyone tell where should I start or what the problem might be.
Thanks
Logged

johnsachs

  • Vendor
  • Elite CVO Member
  • *
  • Offline Offline
  • Posts: 761
Re: 2012 CVO RoadGluide
« Reply #1 on: April 11, 2025, 04:41:34 PM »
Compression test, then followed by removing the push rods in both cylinders. Install an air fitting in each cylinder, hook up an air hose 40 0r so pressure, one at a time, and listen. :nixweiss: Be SURE it's OUT OF GEAR !
John
« Last Edit: April 11, 2025, 04:43:29 PM by johnsachs »
Logged
 

Page created in 0.233 seconds with 25 queries.