www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: HTCC HEADS ON 110 INCH  (Read 992 times)

0 Members and 1 Guest are viewing this topic.

evilroadking

  • Guest
HTCC HEADS ON 110 INCH
« on: May 08, 2007, 12:48:53 AM »
Anyone know if the SE HTCC heads will work or fit on the SE 110 inch? The Ultra SE is a major pig measured against the 103 inch. Probably an issue with the gearbox too. I dont think the gearing is to friendly with the torque band. Anone doing anything with the heads on these. Would like to hear your ideas here.
Logged

Hoist!

  • Monster
  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 21634
  • This chit ain't ROCKET SCIENCE!!!!

    • CVO1: '07C FLHRSE3, BLACK ICE OF COURSE, CUSTOM 110" TC 6-SPEED +++, "CYBIL"!!!
    • CVO2: '99 FXR3 BRIGHT & DARK CANDY BLUE W/FLAMES, STAGE II 80" EVO 5-SPEED +++, "JOY"!!!
    • CVO3: 4: & 5: '85 FXWG BLACK w/CUSTOM FLAMES, 110" EVO 6-SPEED +++ CVO style!!!; '08 NSMC PROSG CUSTOM FXR BASED PRO STREET BLACK, 89" EVO 5-SPEED, VERY FAST!!!; '09 NSMC HSTBBR CUSTOM RIGID HOISTBOBBER, SILVER METALFLAKE BATES SOLO SEAT & TIN w/BLACK WISHBONE FRAME, 80" EVO (w/Shovelhead bottom end) 4-SPEED! VERY COOL!!!
Re: HTCC HEADS ON 110 INCH
« Reply #1 on: May 08, 2007, 01:01:47 AM »
Quote from: evilroadking on May 08, 2007, 12:48:53 AM
Anyone know if the SE HTCC heads will work or fit on the SE 110 inch? The Ultra SE is a major pig measured against the 103 inch. Probably an issue with the gearbox too. I dont think the gearing is to friendly with the torque band. Anone doing anything with the heads on these. Would like to hear your ideas here.

Welcome aboard Evil! What have you done to it so far? Any mods at all? I'd think about cams before heads. Most guys here have them set up to run pretty good at various stages of performance, but no one that I know found replacing the heads necessary.The Dyno numbers are pretty comparable with the 103", and with the right cams and setup, they beat the 103" with the same work. There's a lot of great info on this site. Enjoy the site! Hoist! 8)
Logged
"We wanna be free to ride our machines without being hassled by The Man!"

Traxxion Dynamics Suspension Rules! "It ain't braggin' if you can back it up!"

"Cause I'm sitting on top of the world!" (zoom in on satellite map in my Profile)

bisounours

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 7381

Re: HTCC HEADS ON 110 INCH
« Reply #2 on: May 08, 2007, 05:25:44 AM »
Good morning evilroadking !

I send you the  :welcome_005:  from FRANCE.

It'll be nice for the other members if you present you in the thread "New Member Introduction"
with a pic of your bike  :2vrolijk_21:

Best regards

  :vrolijk_26: Jacques
Logged
********2007 FLHTCUSE2 Red/Black**********
 
     2008 FLHTCUSE3, White Frost and Silver Mist
             
                  2011 FLHXSE2, Stage1

2013 FLHRSE5   Crushed Sapphire with Cold Fusion GraphicsCrushed Sapphire with Cold Fusion Graphics

Chief

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5919
  • EBCM #4-3/8
Re: HTCC HEADS ON 110 INCH
« Reply #3 on: May 08, 2007, 08:26:29 AM »
Quote from: evilroadking on May 08, 2007, 12:48:53 AM
Anyone know if the SE HTCC heads will work or fit on the SE 110 inch? The Ultra SE is a major pig measured against the 103 inch. Probably an issue with the gearbox too. I dont think the gearing is to friendly with the torque band. Anone doing anything with the heads on these. Would like to hear your ideas here.

ERK,

Glad to see you made it.

Chief
Logged
 

Page created in 0.216 seconds with 21 queries.