Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: new 525 cams are ready need a LOCAL test bike  (Read 1719 times)

0 Members and 1 Guest are viewing this topic.

GMR-PERFORMANCE

  • Vendor
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1769
    • TX

new 525 cams are ready need a LOCAL test bike
« on: August 14, 2007, 10:45:37 AM »

I have a set of the new 525 cams that we would like to test on the cvo 110 bike,  it would need to have exhaust system and a/c.  Be happy to work out the details once we can locate a local bike to install the new cams, billet cam plate & cover.  There will be some feedback needed.

 As well I need another bike that has the high compression pistons in it to test the 615 cam and billet cam plate & cover.

 Give me a call at the shop, again  we would be doing the install here. I need to be able to verify everything, and ensure that we are getting accurate test results. 

928-445-3473
Logged
2012 SHARK  S&S 124 150/140   www.gmrperformance.com

StreetDog

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 409

    • CVO1: 2016 FLHXSE RED STREET GLIDE
    • CVO2: 2010 FLHXSE SPICED RUM
    • CVO3: 2007 FLHRSE3 RAZOR RED
Re: new 525 cams are ready need a LOCAL test bike
« Reply #1 on: August 14, 2007, 12:03:39 PM »

Where are you located?
Logged

GMR-PERFORMANCE

  • Vendor
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1769
    • TX

Re: new 525 cams are ready need a LOCAL test bike
« Reply #2 on: August 14, 2007, 12:07:07 PM »

Sorry  :oops:  located in Prescott AZ.
Logged
2012 SHARK  S&S 124 150/140   www.gmrperformance.com

rednectum

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 834
Re: new 525 cams are ready need a LOCAL test bike
« Reply #3 on: August 15, 2007, 09:33:07 PM »

we may can help on this if you are on the east coast, or anywhere closer than arizona.

give gmr a call.
Logged

Midnight Rider

  • AKA: TCnBham
  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 11107
  • FLHRSEI.ORG

    • CVO1: 2011 SERGU Rio Red (sold)
Re: new 525 cams are ready need a LOCAL test bike
« Reply #4 on: August 15, 2007, 11:30:33 PM »

Will they work in a 103?   ;D ;)
Logged
Sometimes it takes a whole tankful of fuel before you can think straight.
I had the right to remain silent, just not the ability...

Gone, but not forgotten...2011 FLTRUSE with
Fullsac X Pipe w/2" Baffles
Legend Air Ride Rear Shocks
Traxxion Dynamics AK-20 Front Suspension
Clearview GT13 Windshield
TTS Mastertune

rednectum

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 834
Re: new 525 cams are ready need a LOCAL test bike
« Reply #5 on: August 16, 2007, 07:18:33 AM »

Will they work in a 103?   ;D ;)

yep.
Logged

TimBone

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 794
Re: new 525 cams are ready need a LOCAL test bike
« Reply #6 on: August 16, 2007, 08:19:18 AM »

Did you say you need someone from the east coast?
Logged

Deuce Bigelow

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 388
  • 2010 FLTRX

    • CVO1: 2007 FXSTSSE Canyon Copper - SOLD
    • CVO2: 2010 FLTRX Road Glide Custom
Re: new 525 cams are ready need a LOCAL test bike
« Reply #7 on: August 16, 2007, 11:28:25 AM »

I would also like to volunteer from the east coast! :2vrolijk_21:
Logged
2010 FLTRX Road Glide Custom

GMR-PERFORMANCE

  • Vendor
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1769
    • TX

Re: new 525 cams are ready need a LOCAL test bike
« Reply #8 on: August 16, 2007, 11:54:29 AM »

You guys are funny.. ARIZONA guys  that is what I need. Sorry about that I have one other option that is AL cripple creek is a dealer for us and that would be the only other shop.
Logged
2012 SHARK  S&S 124 150/140   www.gmrperformance.com

Deuce Bigelow

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 388
  • 2010 FLTRX

    • CVO1: 2007 FXSTSSE Canyon Copper - SOLD
    • CVO2: 2010 FLTRX Road Glide Custom
Re: new 525 cams are ready need a LOCAL test bike
« Reply #9 on: August 16, 2007, 11:58:03 AM »

Damm.......... :P

you need a shop in NJ! :2vrolijk_21:
Logged
2010 FLTRX Road Glide Custom

Midnight Rider

  • AKA: TCnBham
  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 11107
  • FLHRSEI.ORG

    • CVO1: 2011 SERGU Rio Red (sold)
Re: new 525 cams are ready need a LOCAL test bike
« Reply #10 on: August 16, 2007, 12:59:07 PM »

You guys are funny.. ARIZONA guys  that is what I need. Sorry about that I have one other option that is AL cripple creek is a dealer for us and that would be the only other shop.

I'm only 150 miles from CC, but I've got a 103.

There is one other member here who lives close enough to CC...

Iski...where are you, man?
Logged
Sometimes it takes a whole tankful of fuel before you can think straight.
I had the right to remain silent, just not the ability...

Gone, but not forgotten...2011 FLTRUSE with
Fullsac X Pipe w/2" Baffles
Legend Air Ride Rear Shocks
Traxxion Dynamics AK-20 Front Suspension
Clearview GT13 Windshield
TTS Mastertune

Unbalanced

  • FUD Examiner
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6709

    • CVO1: 2011 SESG,
    • CVO2: 2004 SEEG Pumpkin,
    • CVO3: 2002 Police Roadking, Maudie and Maybelle Slayer
Re: new 525 cams are ready need a LOCAL test bike
« Reply #11 on: August 16, 2007, 01:03:07 PM »

Steve,

Do you have any spec's to post on the cam, since your asking for a volunteer, it just might entice someone having more information.

Lift, Duration, overlap, stock base circle or other, 53 degree timing.
Logged
HBRR Florida Chapter,  STILL - The Fastest Chapter - Proven yet again Bikeweek 2017

GMR-PERFORMANCE

  • Vendor
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1769
    • TX

Re: new 525 cams are ready need a LOCAL test bike
« Reply #12 on: August 16, 2007, 02:58:26 PM »

525/525   20/38 int 48/16 ex  238/ 244 duration 103 lsa 100 int cl 106 cl ex

 This cam is offered in 99-06 ( not dyna) gear drive
 and 07 gear drive only with a billet cam plate, as well in a few more weeks in a chain drive set up for a 07 with a new cam plate with bushings in it.
Logged
2012 SHARK  S&S 124 150/140   www.gmrperformance.com

RetiredOF

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 267
  • Coming soon to a location near you!
Re: new 525 cams are ready need a LOCAL test bike
« Reply #13 on: August 16, 2007, 03:01:50 PM »

How about Arkansas?
Logged
Member 3063

GMR-PERFORMANCE

  • Vendor
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1769
    • TX

Re: new 525 cams are ready need a LOCAL test bike
« Reply #14 on: August 16, 2007, 03:06:03 PM »

Sorry but no I really want to do it here. with free labor and almost cost on the parts for a cam that we have already used in 88 inch and 95 inches and made great power this is a smoking deal. The 88 with pipe a/c tuned made 83 hp and 94 tq that is in a 88 inch so think what it would do for a 110. 

AZ is my number one place to do this install.   Now if you want to buy one sure not a problem but for the deal i am offering I have to stuck to my guns.  We have started using this in all of or 98 inch kits and even in some of the mild 107 kits.
Logged
2012 SHARK  S&S 124 150/140   www.gmrperformance.com
 

Page created in 0.239 seconds with 25 queries.