This is for an '07 SERK3. I've replaced the bolts on my motor with Feuling/ARP Polished SS 12 point bolts. Feuling doesn't make them for the Trans and Primary Covers, only the engine. The SERK3 Parts Manual shows the P/N's for all these bolts. But the Hardware List in there, which describes the fasteners listed by their P/N, doesn't describe 2 of the fasteners I need. Does anyone have a description of these 2 fasteners so I can match them up too?
Missing info on fasteners required:
1. HD P/N 1780 Screw (4), Primary Cover. I assume they are the same screw as HD P/N 4813A (9), the shorter Primary screws. If so, I know the type screw, but what length? If not, what are they?
2. HD P/N 4705 Screw (1), Speed Sensor Screw. No info at all.
The remaining Primary (#4813A), Derby (#1062), Trans Top and Side (#4718A & 4741A), and Timer Cover (#68042-99) screws are all described there. If anyone has this info on the ones I'm missing, or a source to get them as a kit, I'd appreciate it. I can then order the rest of the bolts so it all matches, and so I have the better stuff on everything. TIA Gang!!!
Hoist!
Author
Topic: Missing Hardware Info! (Read 1226 times)