www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: handle bars  (Read 1384 times)

0 Members and 1 Guest are viewing this topic.

PattiB

  • Guest
handle bars
« on: September 29, 2008, 02:17:00 AM »
Has anyone changed bars on 09 SERG? I want to put chubby 10" bars on my 09 SERG. What has to be changed to clutch and brake lines? Thanks Roger
Logged

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50580
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: handle bars
« Reply #1 on: September 29, 2008, 08:43:11 AM »


I just put the Wild1 chubby 10" bars on a 2000 SERG.  Then rode with them back and forth to Maggie Valley and played with them more while there.  All for a test ride for the bars of course.  Really really liked them.  Nicely positioned bars; at least for my arms.

On the 2000 the clutch cable and idle/throttle cables were fine.  Did have to change the brake line.  Needed a +4" line for the brake line.  Is the 09 line segments allowing the upper section to be changed by itself?  And has anyone ever figured out why the ABS bikes supposedly can't be bled anywhere but at the dealership (I still don't believe that one)?
Logged

Indenial

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1752

    • CVO1: 2009 SE Road Glide
    • States Riden on 2009 CVO
Re: handle bars
« Reply #2 on: September 29, 2008, 01:12:33 PM »
Just found out that my '03 Road Glide Buckhorn bars will not fit my new 09 SERG. And they don't make the Buckhorn style for the new bikes. I really liked the Buckhorns, as they fit well and allowed me to ride all day without my shoulders getting sore. Hope they come out with them in Jan.
Logged
I just finished the pile of junk I needed to work on before I get to the stuff I should be doing----

knothead

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 558

    • CVO1: 2009 R-Glide Orange & Black
    • CVO2: 2006 V-Rod Orange & Black
    • CVO3: 2006 V- Rod Destroyer Orange & Black
Re: handle bars
« Reply #3 on: December 09, 2008, 09:41:51 PM »
Has anyone changed out handle bars on the 2008 / 2009 SERK yet ?  If so...where did you get them
Logged
Letz Ride

ironhorse432

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 88
Re: handle bars
« Reply #4 on: December 10, 2008, 09:30:04 AM »
Has anyone changed out handle bars on the 2008 / 2009 SERK yet ?  If so...where did you get them ;D

the moco makes a set of heritage bars for the 09's.right now they don't have a set of buckhorna that will work,or if they do i haven't found them...............ed
Logged

Air-Cooled

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 237
Re: handle bars
« Reply #5 on: December 10, 2008, 06:51:37 PM »
Buckhorn bars were my favorite of all Harley Bars.
Logged

Indenial

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1752

    • CVO1: 2009 SE Road Glide
    • States Riden on 2009 CVO
Re: handle bars
« Reply #6 on: December 11, 2008, 04:46:00 PM »
Can a set of 08 Buckhorn bars be fitted for an 09 SERG. WIth the electronic throttle and extra hole in the center of the handlebar for cables? Has anyone attempted this?
Logged
I just finished the pile of junk I needed to work on before I get to the stuff I should be doing----

bdas2

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 268
  • FLHRSEI.ORG
Re: handle bars
« Reply #7 on: December 11, 2008, 11:06:45 PM »
any video or instructions on the site for replacing the bars on an ultra 08 and 09.  I searched but no luck
Logged

bdas2

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 268
  • FLHRSEI.ORG
Re: handle bars
« Reply #8 on: December 15, 2008, 01:57:02 PM »
I guess the answer is no to the video or instructions........since nobody responded


thanks anyway ::)
Logged
 

Page created in 0.226 seconds with 21 queries.