Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Thoughts on the Dynojet LCD for PCIII  (Read 744 times)

0 Members and 1 Guest are viewing this topic.

Godeater

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 113
  • FLHRSEI.ORG

    • CVO1: 2001 ScreaminEagle Road Glide Blk/Sil
    • Radical Cycle
Thoughts on the Dynojet LCD for PCIII
« on: February 24, 2009, 11:11:34 PM »

Just wondered if anyone had used one or had good/bad experiences with the unit?  Seems like it does allot if your the type that likes to tweak with air fuel or just have extra info.
Logged
2001 FLTRISE2 103 Stroker
Screamin Eagle Forged Stroker Crank
Screamin Eagle Forged Stroker Pistons 5 Over
Stock Jugs 5 Over
Polished and Ported Stock Heads
Manly Titanium Springs 640 Lift
Manly Stainless Valves
Screamin Eagle Cam Plate and High Flo Pump
S&S 585 Gear Drives
Horse Power Inc. 51mm Intake with Screamin Eagle 25 deg Injectors 62 psi Fuel Reg
Power Commander III USB
Screamin Eagle Heavy Breather
D&D Fatcat Stand Baffle
Baker OD6 speed
Lowered 2 inchs
Danny Grey Seat

hd-dude

  • Global Moderator
  • 5k CVO Member
  • *****
  • Offline Offline
  • Posts: 6646
  • 2005 Cherry FLHTCSE2 "Obsession"

    • CVO1: 05 FLHTCSE2
    • Metal Dragon
Re: Thoughts on the Dynojet LCD for PCIII
« Reply #1 on: February 24, 2009, 11:23:38 PM »

If you want the ability to tweek you AFR get Twin Scan and Wego III. It has data logging capabilities that you can retrieve when you are in the garage. Trying to watch an AFR guage while your riding is VERY dangerous.

Godeater

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 113
  • FLHRSEI.ORG

    • CVO1: 2001 ScreaminEagle Road Glide Blk/Sil
    • Radical Cycle
Re: Thoughts on the Dynojet LCD for PCIII
« Reply #2 on: February 25, 2009, 07:24:28 AM »

 ;D
Good point, but the LCD does data logging and stores as many maps as you can fit on a 1gb sd chip.  Also connects to the wideband commander and lets you see AFR and log it as well.  To be reviewed and tweaked when you pull over of course./ ;D
« Last Edit: February 25, 2009, 07:04:07 PM by Godeater »
Logged
2001 FLTRISE2 103 Stroker
Screamin Eagle Forged Stroker Crank
Screamin Eagle Forged Stroker Pistons 5 Over
Stock Jugs 5 Over
Polished and Ported Stock Heads
Manly Titanium Springs 640 Lift
Manly Stainless Valves
Screamin Eagle Cam Plate and High Flo Pump
S&S 585 Gear Drives
Horse Power Inc. 51mm Intake with Screamin Eagle 25 deg Injectors 62 psi Fuel Reg
Power Commander III USB
Screamin Eagle Heavy Breather
D&D Fatcat Stand Baffle
Baker OD6 speed
Lowered 2 inchs
Danny Grey Seat

REGGAB

  • Guest
Re: Thoughts on the Dynojet LCD for PCIII
« Reply #3 on: February 25, 2009, 07:57:36 AM »

Question:  Is either of these devices a permanent attachment, or are they diagnostic tools one can install/remove on an as needed basis, store in the saddlebag, and use to adjust A/F mixture on open loop systems for optimal performance when traveling across the country and experiencing changes in altitude, temperature, etc..........
Logged

Godeater

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 113
  • FLHRSEI.ORG

    • CVO1: 2001 ScreaminEagle Road Glide Blk/Sil
    • Radical Cycle
Re: Thoughts on the Dynojet LCD for PCIII
« Reply #4 on: February 25, 2009, 07:03:24 PM »

You can mount the LCD with several of the popular device mounts, or use it as a diag tool if you like.
Logged
2001 FLTRISE2 103 Stroker
Screamin Eagle Forged Stroker Crank
Screamin Eagle Forged Stroker Pistons 5 Over
Stock Jugs 5 Over
Polished and Ported Stock Heads
Manly Titanium Springs 640 Lift
Manly Stainless Valves
Screamin Eagle Cam Plate and High Flo Pump
S&S 585 Gear Drives
Horse Power Inc. 51mm Intake with Screamin Eagle 25 deg Injectors 62 psi Fuel Reg
Power Commander III USB
Screamin Eagle Heavy Breather
D&D Fatcat Stand Baffle
Baker OD6 speed
Lowered 2 inchs
Danny Grey Seat
 

Page created in 0.202 seconds with 21 queries.