Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Gutter Man]

Are the baffles removable? I removed the screw at the back of the pipe and tried getting the baffle out with no success. I was going to try to wrap a little fiberglass around the baffle to quiet it slightly If I can get it in there.

Gutter man

[JeffsHogPen]

I don't think that they are. I think that it is a performance issue.

[SERK3]

Yes, They will come out, Have removed them on two different sets and replaced them with Thunder Monster baffels. They do fit tight, Bend a hook on a heavy wire then hook it on the baffel and pull, they will come out.

[BMF-110]

Very, very tight fit, used a slide hammer and a short 90 worked well,sounded better when I was done!!

[mrmagloo]

I removed mine too and swapped to the Big City Thunders, but I thought there was a rivet or something that had to be removed?  My mind is fading. Once I did that, they came out withouth much of a problem.

[SERK3]

Torx head bolt at the very back of baffel

[mrmagloo]

There you go!

[SERK3]

Are the baffles removable? I removed the screw at the back of the pipe and tried getting the baffle out with no success. I was going to try to wrap a little fiberglass around the baffle to quiet it slightly If I can get it in there.

Gutter man

they are so tight i really don't think you will be able to wrap in fiberglass and get them back in. 

[mrmagloo]

I actually think my Big City Baffles would allow a single wrap. I'm not sure exactly what it is, but my BR have always had a slight rattle at certain RPM's that drives me nuts. I'm sure it's the shields, but I'm actually thinking about tearing the whole thing apart to do a thorough rattle prevention treatment.