www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 2 3 [4]  All

Author Topic: Starting Issues  (Read 6071 times)

0 Members and 1 Guest are viewing this topic.

jonga

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 401
  • FLHRSEI.ORG
Re: Starting Issues
« Reply #45 on: July 15, 2009, 07:08:40 PM »
Thanks Dood, appreciate the info, kinda figured it was a no-brainer, just being a little lazy on my part. Thanks again, Jon   :2vrolijk_21:
Logged

DakotaZeb

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 535
  • FLHRSEI.ORG
Re: Starting Issues
« Reply #46 on: July 15, 2009, 08:57:53 PM »
I'm having starting issues as described in this thread with my '03 SERK.  Grinds and sounds terrible sometimes.  The problem is intermitent.  So, do the '03 CVO 103s have the ARCs?  Could downloading a map to a PC III cause the ACRs to turn off?

I'm taking mine into the dealer tomorrow but would appreciate any advice/ideas any of you have prior to going to the dealer.
Logged

grc

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 14216
  • AKA Grouchy Old Fart
    • IN


    • CVO1: 2005 SEEG2
Re: Starting Issues
« Reply #47 on: July 15, 2009, 09:05:22 PM »
Quote from: DakotaZeb on July 15, 2009, 08:57:53 PM
I'm having starting issues as described in this thread with my '03 SERK.  Grinds and sounds terrible sometimes.  The problem is intermitent.  So, do the '03 CVO 103s have the ARCs?  Could downloading a map to a PC III cause the ACRs to turn off?

I'm taking mine into the dealer tomorrow but would appreciate any advice/ideas any of you have prior to going to the dealer.

No compression releases on the 103's unless they were added by the owner.  There have been others with starter issues on 103's however, anything from the starter itself to the ring gear teeth on the clutch and/or the starter drive gear.  They will need to do normal diagnostics.

Jerry
Logged
Jerry - 2005 Cherry SEEG  -  Member # 1155

H-D and me  -  a classic love / hate relationship.  Current score:  love 40, hate 50, bewildered 10.

DakotaZeb

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 535
  • FLHRSEI.ORG
Re: Starting Issues
« Reply #48 on: July 15, 2009, 09:06:30 PM »
Thanks Jerry.
Logged

1abastarsmda

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 3403
    • PA

    • CVO1: 2021 CVO Limited
Re: Starting Issues
« Reply #49 on: July 15, 2009, 11:00:07 PM »
Quote from: DakotaZeb on July 15, 2009, 08:57:53 PM
I'm having starting issues as described in this thread with my '03 SERK.  Grinds and sounds terrible sometimes.  The problem is intermitent.  So, do the '03 CVO 103s have the ARCs?  Could downloading a map to a PC III cause the ACRs to turn off?

I'm taking mine into the dealer tomorrow but would appreciate any advice/ideas any of you have prior to going to the dealer.

My friend had the problem on his 03 SERK.  His solution was very simple...he traded it on an 08 SEUC.
Logged

ANAIL1

  • Newbie
  • *
  • Offline Offline
  • Posts: 13

    • CVO1: SEUC2 sold
    • CVO2: SEUC4 SOLD
    • CVO3: SERK4 & SEUC7
Re: Starting Issues
« Reply #50 on: July 24, 2009, 10:15:06 PM »
TOOK MY 09SEUC TO THE DEALER ON THURSDAY FOR STARTING ISSUSES THEY TOLD ME TODAY THE STARTER CLUTCH WAS TOAST. HOPEFULEY THIS WON'T BE A ON GOING ISSUE THEY DIDN'T SAY ANYTHING ABOUT THE ACR'S
Logged
Pages: 1 2 3 [4]  All
« previous next »
 

Page created in 0.215 seconds with 21 queries.