www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: 79D motor mount  (Read 843 times)

0 Members and 1 Guest are viewing this topic.

dc1955

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
79D motor mount
« on: August 16, 2009, 08:52:50 PM »
OK FOLKS I HAVE A 2006 ULTRA. I AM ATTEMPTING TO REPLACE THE  MOTOR MOUNT. THE ONE I HAVE IS A 79D. I CAN NOT GET IT IN. FIRST OFF WHICH IS THE CORRECT POSITION/ BIG FLAT WASHER UP OR DOWN? EITHER WAY IT WILL NOT GO IN.
Logged

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50553
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: 79D motor mount
« Reply #1 on: August 16, 2009, 09:17:57 PM »
Orientation of the mount as illustrated.  Big washer on the bottom.
Logged

hd-dude

  • Global Moderator
  • 5k CVO Member
  • *****
  • Offline Offline
  • Posts: 6646
  • 2005 Cherry FLHTCSE2 "Obsession"

    • CVO1: 05 FLHTCSE2
    • Metal Dragon
Re: 79D motor mount
« Reply #2 on: August 16, 2009, 09:18:17 PM »
Place a jack under the engine, Remove the center bolt on the mount and the two side mount bolts. Loosen (no need to remove)the two bolts that hold the trianglular mount to the engine and jack the engine up slightly, this will allow enough room to ge the mount in.
Logged
 

Page created in 0.232 seconds with 25 queries.