Topic: 2004 CVO Electric Glide lowering question (Read 2966 times)

PattiB · « **on:** July 18, 2013, 11:55:42 AM »

Can anyone tell me how to figure out if a 04 pumkin was lowered? Just bought it and was told it was not but seems it has been. Thanks Roger

Fired00d · « **Reply #1 on:** July 18, 2013, 12:28:26 PM »

Stock they are lowered one inch front and back.

Ride Safe,
Fired00d

PattiB · « **Reply #2 on:** July 18, 2013, 06:28:32 PM »

I knew the back was but the front I did not know about. Can you give me a measurement from the upper slider (can) to the center of the axle of your 04? Mind is 12 3/8". Thank You Roger

Fired00d · « **Reply #3 on:** July 18, 2013, 06:57:22 PM »

Quote from: Roger B on July 18, 2013, 06:28:32 PM

I knew the back was but the front I did not know about. Can you give me a measurement from the upper slider (can) to the center of the axle of your 04? Mind is 12 3/8". Thank You Roger

I know longer have the "stock" (front or back) suspension on my bike so my measurements wouldn't be true to stock and be a good comparison.

Ride Safe,
Fired00d

PattiB · « **Reply #4 on:** July 18, 2013, 07:10:04 PM »

Thanks anyway. Roger

grc · « **Reply #5 on:** July 18, 2013, 07:11:21 PM »

Quote from: Roger B on July 18, 2013, 06:28:32 PM

I knew the back was but the front I did not know about. Can you give me a measurement from the upper slider (can) to the center of the axle of your 04? Mind is 12 3/8". Thank You Roger

That's basically the same as mine (roughly 12.5"). The 2004/2005 SEEG's were the last CVO's I'm aware of that came lowered both front and rear. Others like the Street Glide and Road Glide were only lowered at the rear.

Jerry

Gettinold · « **Reply #6 on:** July 18, 2013, 07:18:32 PM »

Mine setting stock.

PattiB · « **Reply #7 on:** July 18, 2013, 07:21:35 PM »

Thanks, that was a big help. The reason I`m asking is that I am going to put in the progressive monotubes and don`t want to change the height. Probably will order the 1" lower kit. Thanks Roger

Fired00d · « **Reply #8 on:** July 18, 2013, 07:25:23 PM »

Quote from: Roger B on July 18, 2013, 07:21:35 PM

Thanks, that was a big help. The reason I`m asking is that I am going to put in the progressive monotubes and don`t want to change the height. Probably will order the 1" lower kit.Thanks Roger

I have the Progressive Monotubes and those are what I used.

Ride Safe,
Fired00d

PattiB · « **Reply #9 on:** July 18, 2013, 07:45:43 PM »

Thanks for the help.

spydglide · « **Reply #10 on:** July 18, 2013, 08:00:21 PM »

Quote from: Gettinold on July 18, 2013, 07:18:32 PM

Mine setting stock.

What kind of 'club' is that? And is that 'stock' bike still for sale? spyder

Author Topic: 2004 CVO Electric Glide lowering question (Read 2966 times)

PattiB

2004 CVO Electric Glide lowering question

Fired00d

Re: 2004 CVO Electric Glide lowering question

PattiB

Re: 2004 CVO Electric Glide lowering question

Fired00d

Re: 2004 CVO Electric Glide lowering question

PattiB

Re: 2004 CVO Electric Glide lowering question

grc

Re: 2004 CVO Electric Glide lowering question

Gettinold

Re: 2004 CVO Electric Glide lowering question

PattiB

Re: 2004 CVO Electric Glide lowering question

Fired00d

Re: 2004 CVO Electric Glide lowering question

PattiB

Re: 2004 CVO Electric Glide lowering question

spydglide

Re: 2004 CVO Electric Glide lowering question