www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: 14" monkey bars over lengths  (Read 2181 times)

0 Members and 1 Guest are viewing this topic.

Puck

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 143
  • LIVE FREE OR DIE......

    • CVO1: 2012 FLHXSE3 Black Diamond
    • CVO2: 2008 FXSTC vivid black...45" sissy bar & 18" 1.5 apes
    • CVO3: 2008 xl1200c bobtail,low riser,gauges,lowered,tuned,fast as hell
14" monkey bars over lengths
« on: January 04, 2013, 02:20:02 PM »
To those that have done 14" monkey bars... on a SG...what size over clutch hose and upper brake line was needed? how much did the wires need? Cant find this anywhere....Thanks...I'm gonna do a install thread when I get all this together...
« Last Edit: January 05, 2013, 01:26:20 AM by Puck »
Logged

15CVOSG

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 581
    • AZ


    • CVO1: 2015 CVO FLHXSE (SOLD)
    • CVO2: 2012 CVO FLHXSE3 (SOLD)
    • CVO3: 2011 CVO FLHXSE2 (SOLD)
Re: 14" monkey bars over lengths
« Reply #1 on: January 05, 2013, 12:44:27 AM »
I would think a plus +6 for Clutch and brake lines...not sure on the wiring.....
Logged

Fatboy

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1536
  • 2023 Dark Platinum 121 VVT "starter kit"
    • FL

Re: 14" monkey bars over lengths
« Reply #2 on: January 05, 2013, 01:19:01 AM »
Quote from: Puck on January 04, 2013, 02:20:02 PM
To those that have done 14" monkey bars...what size over clutch hose and upper brake line was needed? how much did the wires need? Cant find this anywhere....Thanks...I'm gonna do a install thread when I get all this together...

Check out Fisheye's post in the Selling section of this forum for the correct answer.
Logged

willyB

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1128
Re: 14" monkey bars over lengths
« Reply #3 on: January 05, 2013, 11:06:54 AM »
Yaffee sells the complete wiring and line kit.... Just Sayin'

I could not find the right answer when I installed my 12" monkey bars. That was even after calling the line guys. Finally one of them told me to call Yaffee. Probably a little more money but they were perfect and the wires were correctly color coded.
Logged
GMR 577 Cams, S & S Lifters, S & S Pushrods, V&H Headers, Rinehart 4” Slipons, TTS Tuner, 12" Yaffee Monkey Bars, Color Matched Chopped Tour Pak (510 HP and 763 TQ +/-)

Fatboy

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1536
  • 2023 Dark Platinum 121 VVT "starter kit"
    • FL

Re: 14" monkey bars over lengths
« Reply #4 on: January 05, 2013, 04:00:24 PM »
12" Monkey Bars take +6" clutch & front upper brake line extensions

14" Monkey Bars take +8" clutch & front upper brake line extensions

both will require a new piece call the "mid" that will join the new upper hose to the ABS junction box.

the stock set up is a one piece upper ABS line from the bars to the box, the new set up with be a two piece design.

Magnum Shielding can help you here and you can buy direct from them.

Namz is a good source for all wire extension kits.

As mentioned Yaffe can help too put I find their kit quality lacking and over priced.
Logged

Puck

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 143
  • LIVE FREE OR DIE......

    • CVO1: 2012 FLHXSE3 Black Diamond
    • CVO2: 2008 FXSTC vivid black...45" sissy bar & 18" 1.5 apes
    • CVO3: 2008 xl1200c bobtail,low riser,gauges,lowered,tuned,fast as hell
Re: 14" monkey bars over lengths
« Reply #5 on: January 05, 2013, 05:50:04 PM »
Thanks.....eastern perf sells a wiring kit for SE BIKES WITH TBW...I guess the CvO and se TBW are diff somehow..the have a color coded kit...
Logged

Puck

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 143
  • LIVE FREE OR DIE......

    • CVO1: 2012 FLHXSE3 Black Diamond
    • CVO2: 2008 FXSTC vivid black...45" sissy bar & 18" 1.5 apes
    • CVO3: 2008 xl1200c bobtail,low riser,gauges,lowered,tuned,fast as hell
Re: 14" monkey bars over lengths
« Reply #6 on: January 05, 2013, 05:55:16 PM »
Man, my bike is at my shop so I can't go look...anyone know what angle the clutch line banjo is? 0,35 or 90?
Logged

krypto2011

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 313
Re: 14" monkey bars over lengths
« Reply #7 on: January 05, 2013, 10:53:49 PM »
Did mine last week it definitely wasn't 90 so must of been 35
Logged
2011 SESG Krypto/Black Diamond, SE 259e cams, SE 5.3 injectors, HPI 58mm throttle body, heads ported and polished, V&H power duals, CFR mufflers, SE race tuner, SE high flow air filter

redbeard719

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 336

    • CVO1: 2010 FLHXSE converted to FLTRXSE
    • CVO2: 2006 FLSTSCI
Re: 14" monkey bars over lengths
« Reply #8 on: January 07, 2013, 04:37:35 PM »
Quote from: Puck on January 05, 2013, 05:55:16 PM
Man, my bike is at my shop so I can't go look...anyone know what angle the clutch line banjo is? 0,35 or 90?

Its a 35* on the clutch cable.

I have a clutch cable used with these exact bars, as well as an upper brake line - Both for sale. 

I switch to taller bars on my CVO RG conversion.  Let me know if you're interested; there is also a post in the for sale section.

BTW, it's +8 on the clutch and brake line.
Logged
 

Page created in 0.219 seconds with 21 queries.