Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[JZ3]

I added the aux passing lights to my 2010 SESG and replaced the turn signals with clear LEDs/load equalizer which illuminate amber when the bike is running and as turn signals.  Not sure I like the LEDs lit all the time and want to know how to disable them as running lights so they only illuminate as turn signals.  With the headlamps/aux passing lights I think I have plenty of light to be seen by others....just don't want the LEDs on all the time. Is there a easy fix?

[grc]

I added the aux passing lights to my 2010 SESG and replaced the turn signals with clear LEDs/load equalizer which illuminate amber when the bike is running and as turn signals.  Not sure I like the LEDs lit all the time and want to know how to disable them as running lights so they only illuminate as turn signals.  With the headlamps/aux passing lights I think I have plenty of light to be seen by others....just don't want the LEDs on all the time. Is there a easy fix?

Check your local laws first; the amber front running lights (and the red rear tail lights) are a Federal requirement which most states also enforce.  If you're determined to eliminate them, the blue wires going to each bulb are for the running lights.  Trace the blue wires back to the connector that mates up with the main harness, remove the terminals from one half of the connector, and tape them off.  I suggest that method rather than just cutting the wires, so it will be easy to put them back later.


Jerry

[JZ3]

Thanks Jerry!