Topic: Fairing bracket bent? (Read 1096 times)

Hotrod50 · « **on:** July 07, 2010, 01:25:47 AM »

Ok, stupid question time. I'm trying to replace my inner fairing on my SERG3. I wrecked it awhile back and just received the new fairing. I have disconnected everything, pulled the black bracket off that holds on the radio and holds the inner fairing on. My question is about the bracket behind the inner fairing that extends back under the speedometer pod. Is it supposed to be perfectly square all aligned evenly? It looks high on one side, but I know there is some adjustability when mounting the inner fairing and the radio bracket. My looks crooked and I think I might have bent it in the wreck. But if I can get the fairing all squared up, does it matter?

HDDOCFL · « **Reply #1 on:** July 07, 2010, 08:37:35 AM »

Try going back a few pages and look for the tread on installing 2010 fairing brackets to a 09 SERG, it has plenty of pics. Doc

Highjagger · « **Reply #2 on:** July 07, 2010, 09:45:26 AM »

http://www.cvoharley.com/smf/index.php?topic=43537.0;all

Here you will find your answer.

Author Topic: Fairing bracket bent? (Read 1096 times)

Hotrod50

Fairing bracket bent?

HDDOCFL

Re: Fairing bracket bent?

Highjagger

Re: Fairing bracket bent?