Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[heatseeker]

Has anyone posted a step by step instructions on how to do the install of the x-pipe and with pics?

[timtoolman]

are you really serious??

[HOGMIKE]

Has anyone posted a step by step instructions on how to do the install of the x-pipe and with pics?

Follow the service manual, the procedure is the same.
 

[2harleys]

Just take off old parts, then put new ones on just like the old ones came off.  Very easy install.

[mjb765]

It will be much easier if you take off the right side cover, then trace and unplug the O2 sensor wiring before you take the pipe off. You will need to cut some wire ties, but it is much easier than trying to remove the sensors with the pipe on the bike while twisting the wiring for the sensors. Just make note which one goes where on the pipe--I think 1 has a black plug and the other a gray plug.  You don't want to mix them up.....Install the sensors on the new pipe then put the pipe on the bike  then run the wiring back up the frame rail and plug them both in. Be sure you have some black wire ties on hand.

[heatseeker]

I know that it sounded silly me asking that and I should have been more explicit in my question. Thanks MJB765, that's what i was most concerned with. Just want to do more of my own work instead of taking it to the dealer. Thanks to all of you.