Topic: Flush Mount Gas Cap LEDs Not Burning (Read 941 times)

Majorrocky · « **on:** July 06, 2010, 07:06:16 PM »

Several weeks ago I looked down and 2 of the LEDs on my flush mount gas cap gauge weren't burning. They magically started working again shortly afterwards

but they are now disfunctional again. I wouldn't care so much if it was the last 2 indicating a full tank but it's the 2nd and 3rd ones from the left (as the fuel runs low) so it gets hard to figure out when I need to refill. Well, not really, as I can use the remaining mileage gauge, but it's aggravating as hell to look down and see those not burning...

Anybody seen this, have a possible resolution, etc? Anything I can check to maybe get them working again without replacing the whole thing?

kraut · « **Reply #1 on:** July 07, 2010, 03:03:09 AM »

I'm afraid no. Had the same experience with my last FLHRCI. There is no known way to repair those LEDs.

I decided to live with it as the readings were not really trustworthy anyway

Majorrocky · « **Reply #2 on:** July 07, 2010, 12:36:23 PM »

Grrrrr!!!!

I was afraid of that... thanks for the response.

brassspike · « **Reply #3 on:** July 07, 2010, 02:45:36 PM »

I think there is an "improved" design out. I had mine replaced under warranty and they work fine (for) now.

SIX38 · « **Reply #4 on:** July 12, 2010, 06:08:42 PM »

Quote from: brassspike on July 07, 2010, 02:45:36 PM

I think there is an "improved" design out. I had mine replaced under warranty and they work fine (for) now.

Dealer replaced 3 times, finally got a working one, then sold the Road King.
Tom P.

Author Topic: Flush Mount Gas Cap LEDs Not Burning (Read 941 times)

Majorrocky

Flush Mount Gas Cap LEDs Not Burning

kraut

Re: Flush Mount Gas Cap LEDs Not Burning

Majorrocky

Re: Flush Mount Gas Cap LEDs Not Burning

brassspike

Re: Flush Mount Gas Cap LEDs Not Burning

SIX38

Re: Flush Mount Gas Cap LEDs Not Burning