Topic: MotoLight issue (Read 889 times)

roadking71865 · « **on:** July 22, 2013, 08:53:05 PM »

One LED Motolight keeps burning out. It's always the same one. I replace, it works for a short while then goes out again. No wiring or anything has changed with my bike. Ideas??

phato1 · « **Reply #1 on:** July 22, 2013, 09:49:08 PM »

Have you checked the wiring for any areas where they are damaged/pinched causing an intermittent short?

tweeter13 · « **Reply #2 on:** July 22, 2013, 10:08:31 PM »

You may also have a bad seal for the lens or a small crack somewhere and moisture is getting into it. That would make the bulb blow. Moisture may be getting in behind the LEDs and causing the problem. I am the instructions from their web site. If you touch them or put that gasket in just a little off.
I believe these are what you are putting in?
http://www.motolight.com/product/LED%20Bulb%20Kit

Here is the instructions.
http://www.motolight.com/files/1953750/uploaded/Motolight%20Lamp%20Replacement%20Instructions.pdf

I hope this is what you are talking about. If so I hope it helps ya.

Todd.

Author Topic: MotoLight issue (Read 889 times)

roadking71865

MotoLight issue

phato1

Re: MotoLight issue

tweeter13

Re: MotoLight issue