Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[berniemc]

Removed faiting yesterday and removed radio for mods.In the process I unplugged a couple of wiring harness close to radio to help in getting to the radio bolts and now when I tutn on the ignition ,the starter.horn, blinkerand radio will not work.Only thing that comes on is front and rear parking lights and instrument panel lights. Any help will be appreciated.Thanks

[HDDOCFL]

Sounds like you pulled some of the wires out of the ignition switch under the radio, when you removed the radio.  The heavy red wires.  Doc

[berniemc]

It did the same thing another time yesterday cause I had to remove the radio twice and I checked all the plug ins and turned ignition switch on and off a few times and all of a sudden it powerd up and was fine but the next time I cant get it to do anyting.Guess I will remove the fairing and check everything one more time.

[HDDOCFL]

The heavy red ignition wires are connected with spades to the igniton they can become losse fitting if bent. Make sure they are a tight fit. Also you may have bent a pin on the plug ins. remove the ones you played with and check the pins.  Doc

[HOGMIKE]

Removed faiting yesterday and removed radio for mods.In the process I unplugged a couple of wiring harness close to radio to help in getting to the radio bolts and now when I tutn on the ignition ,the starter.horn, blinkerand radio will not work.Only thing that comes on is front and rear parking lights and instrument panel lights. Any help will be appreciated.Thanks

What year and model??

Maybe check the black ground wire, left side of fairing area, usually has a small quick connect in the circuit. Easy to dislodge and easy to miss.
 

[berniemc]

2010 Ultra. Just checked and the ground wire was off. Put it back on and still nothing but lights.Thanks

[berniemc]

Finally got it. Pushed in real hard on ignition harness plug in and that was it. Thanks