Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[leoniru]

If anyone knows offhand, has access to, or can point me in the right direction to obtain the engine (bore/stroke/CR);  valve (intake & exhaust diameter);  cam (lift & duration);  throttle body(type/size);  and fuel injector(size/flow rate) specs for a bone stock 2007 110" motor (SERK) I would greatly appreciate it. I am preparing to install Rev Performance's  EMS Tuning kit and need to furnish this info when I send in the ECM for modification. (I would think that Rev Performance most likely has this data.....I didn't check yet but it wouldn't hurt to have ths info myself). The service manual I bought from my stealer (shortly after buying the bike) is for the 96" motor  (I don't know how it differs from the 110" other than bore and/or stroke) and doesn't list most of the needed specs anyway. Calling my stealer is not something I want to do as I've had mostly disappointments when dealing with them and I'd be very surprised if they'd even provide the data once they knew what it was for!
A few quick searches on this forum didn't turn up anything either, so if anyone can help I'd appreciate it.

leoniru

[Twolanerider]

If anyone knows offhand, has access to, or can point me in the right direction to obtain the engine (bore/stroke/CR);  valve (intake & exhaust diameter);  cam (lift & duration);  throttle body(type/size);  and fuel injector(size/flow rate) specs for a bone stock 2007 110" motor (SERK) I would greatly appreciate it. I am preparing to install Rev Performance's  EMS Tuning kit and need to furnish this info when I send in the ECM for modification. (I would think that Rev Performance most likely has this data.....I didn't check yet but it wouldn't hurt to have ths info myself). The service manual I bought from my stealer (shortly after buying the bike) is for the 96" motor  (I don't know how it differs from the 110" other than bore and/or stroke) and doesn't list most of the needed specs anyway. Calling my stealer is not something I want to do as I've had mostly disappointments when dealing with them and I'd be very surprised if they'd even provide the data once they knew what it was for!
A few quick searches on this forum didn't turn up anything either, so if anyone can help I'd appreciate it.

leoniru

For a stock motor they do have all the pertinent data.  In a podcast they've done discussing the system and describing how to get ready for it Brian (their BBMIC) basically says "send what you know and for stock we can do the rest."  I mailed them one earlier this week and only described the aftermarket exhaust option.  For the rest just wrote "stock 2011 CVO 110" motor."

[leoniru]

Thanx TwoLane for confirming what I suspected ........ ya saved me a call.

leoniru