Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[MAYHEM13]

Hi All, I have a 2009 CVO road glide and I recently had my painter paint the Chrome rear license plate light along with a matching frame tonight I took off the old housing and went to install the new one but I have one question, on the original light there was a reflector that was attached to a rubber gasket and I cut it off now when I am installing the new light do I need to re install that rubber gasket that the reflector was attached to? my concern is that it will rub on the paint? I tried a test fit and it looks pretty secure but the last thing I want to do is scratch up the fender. If I do need this gasket does anyone have the part number? when I originally cut that hideous reflector off I didn't do it evenly and took a chunk of the rubber housing with it.

Thank you for all your help.

[GregKhougaz]

You do not need the gasket that was attached to the reflector.  You do need the rectangular gasket which is attached to the plate mounting bracket. 

[MAYHEM13]

Great thanks for the quick response, just so I am clear the rectangular piece is on the back and the wire goes through it and through the fender? thanks and sorry I am a rookie at some of this stuff.