Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Bubba]

Does anyone have a SERT map for the 06 SEUC that will run with the stock mufflers, V&H Dresser Duels and the SE Air Filter that they care to share.  As I would like to put my stock Pipes back on when my wife goes with me on long trips.
I tried to save the The stock Cal # 32876-06B but found out that was impossible with the sert as it only goes one way.

L8tr
Bubba

[FR8TRN]

Yeah you can't save the stock map, you should probably load #36, it's setup for the SE Air Cleaner and should work fine with the pipes your running.  If you don't have Map #36 let me know and I'll get it for ya....

[Bubba]

That's what I did is loaded map #36 but if I stick my stock exhaust back on (which I've not tried it yet) won't it run too RICH? One of the dyno guys at the dealership said that the stock exhaust does not have an O2 sensor port and the way the inside of the exhaust is can't stick the sensor in far enough the do the dyno right.  Would have to weld a O2 plug on the pipe I guess to properly dyno it.
Bubba

[FR8TRN]

It might run a little richer, but not enough to worry about (might actually be right instead of a little lean).

No you can't save (download) a map that exists on the ECM already, only upload maps to it.

[FR8TRN]

There ya go addin stuff after I replied.......

Some pipes I understand they need to drill in to get the sensor far enough in the pipe, I haven't tried but I understand the V&H Ovals are one of those.

[Bubba]

Sorry FR8TRN I read your post wrong the first time I guess too early in the morning....I had hope to fix it before anyone else seen it....
L8tr
Bubba

[ultrafxr]

Yeah you can't save the stock map, you should probably load #36, it's setup for the SE Air Cleaner and should work fine with the pipes your running.  If you don't have Map #36 let me know and I'll get it for ya....

FR8TRN, ever get your bike dyno'd or still running #36?  Heading up to Americade on Wed (then on to Laconia).  Thinking about having Dr. Dyno do mine.  Know or heard anything about him?  Thanks.

Jerry

[FR8TRN]

FR8TRN, ever get your bike dyno'd or still running #36?  Heading up to Americade on Wed (then on to Laconia).  Thinking about having Dr. Dyno do mine.  Know or heard anything about him?  Thanks.

Jerry

Still running #36 Jerry, if it works why screw with it........I'm gettin great mileage and the bike runs like a top, no spits or sputters, no building heat in traffic, I ain't takin a chance on screwin it up.... [smiley=jalapeno.gif]

[ultrafxr]

Still running #36 Jerry, if it works why screw with it........I'm gettin great mileage and the bike runs like a top, no spits or sputters, no building heat in traffic, I ain't takin a chance on screwin it up.... [smiley=jalapeno.gif]

I heard that!  Must say mine runs well also.  Just sometimes the OCD takes control and you feel like ya gotta do something.  Know what I mean.  Probably should leave well enough alone.  If it ain't broke don' break it, huh.

[grc]

FR8TRN, ever get your bike dyno'd or still running #36?  Heading up to Americade on Wed (then on to Laconia).  [highlight]Thinking about having Dr. Dyno do mine.  Know or heard anything about him[/highlight]?  Thanks.

Jerry

Jerry,

Check out this thread - American Iron did a multiple part article on dyno testing and tuning, and Dr. Dyno was the guy involved.  Haven't heard anything negative about him, and he seems to really know his stuff.  http://flhrsei.org/cgi-bin/yabb/YaBB.cgi?num=1149261656

Jerry

[FR8TRN]

I heard that!  Must say mine runs well also.  Just sometimes the OCD takes control and you feel like ya gotta do something.  Know what I mean.  Probably should leave well enough alone.  If it ain't broke don' break it, huh.

Oh I know, just had the chrome inner primary put on and the auto primary tensioner......half thinkin bout some cams.........it never ends... [smiley=xyxthumbs.gif]

[ultrafxr]

Jerry,

Check out this thread - American Iron did a multiple part article on dyno testing and tuning, and Dr. Dyno was the guy involved.  Haven't heard anything negative about him, and he seems to really know his stuff.  http://flhrsei.org/cgi-bin/yabb/YaBB.cgi?num=1149261656

Jerry

Thanks Jerry.  Great article.  

Jerry

[Bubba]

Still running #36 Jerry, if it works why screw with it........I'm gettin great mileage and the bike runs like a top, no spits or sputters, no building heat in traffic, I ain't takin a chance on screwin it up.... [smiley=jalapeno.gif]

See there you go......as you quoted  "I'm gettin great mileage and the bike runs like a top, no spits or sputters, no building heat in traffic, I ain't takin a chance on screwin it up...." Sorry Fr8 just like my grand daughter says PaPa all you do is want want want.  BUT AN"T IT FUN..... [smiley=banana.gif] [smiley=banana.gif] [smiley=jalapeno.gif] [smiley=jalapeno.gif] [smiley=huepfenjump3.gif]

[FR8TRN]

Oh yeah.....it's always fun....... [smiley=xyxthumbs.gif]