Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: tuning the throttle by wire  (Read 961 times)

0 Members and 1 Guest are viewing this topic.

saldana9

  • Newbie
  • *
  • Offline Offline
  • Posts: 37
tuning the throttle by wire
« on: September 01, 2011, 11:06:24 PM »

how do you tune the throttle by wire with the tts? what are most of you running?
Logged

lonewolf55

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 75
Re: tuning the throttle by wire
« Reply #1 on: September 02, 2011, 12:06:14 AM »

I find the throttle blade control tables in the MT8's are a little more "agressive" than the older MT7's and don't need much. I will increase a few points but you have to be careful in the lower tp's as the bike will become sensitive to bumps and feel jerky.
Logged

saldana9

  • Newbie
  • *
  • Offline Offline
  • Posts: 37
Re: tuning the throttle by wire
« Reply #2 on: September 02, 2011, 09:01:59 AM »

I find the throttle blade control tables in the MT8's are a little more "agressive" than the older MT7's and don't need much. I will increase a few points but you have to be careful in the lower tp's as the bike will become sensitive to bumps and feel jerky.

I have a mt7 tune from steve at fullsac and I think mine are maxed out? I cant make them any bigger at least or dont know how. Whats the dif between mt7 & mt8?
Logged

lonewolf55

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 75
Re: tuning the throttle by wire
« Reply #3 on: September 02, 2011, 09:18:00 AM »

The MT8's have a few more tools to tune with. Cam selector, egr tables and the  044 calibrations have idle spark control tables.
Logged
 

Page created in 0.211 seconds with 21 queries.