www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: 110 tear down ?'s  (Read 1808 times)

0 Members and 1 Guest are viewing this topic.

Big C.

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 240

    • CVO1: Stardust Silver & Platinum Dust FLTRSE3
110 tear down ?'s
« on: August 30, 2011, 10:54:57 PM »
  Guy's I need some advice.  My 09 110 is being torn down due to bad finish on the cases and wanted to know what we should do at a minimum while were in there? Currently running a TW-7H woods cam and directional roller lifters with a D&D Boss 2 into 1 loud baffle.  I was thinking I'll have the crank checked and welded if its good and the 10.5 pistons with an .030 head gasket.  Anything else I should look at.  I'm assuming the dealer will resurface/deck the heads if they don't I'll add that to the list.  Just want to try to due it right but not go overboard with the budget.

                                                                      Thanks Again,
                                                                               Cory
Logged

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3133
Re: 110 tear down ?'s
« Reply #1 on: August 31, 2011, 12:32:16 AM »
Weld and true crank, HD 10.5 +.010 pistons bore and hone with tQ plates, replace guides in the heads, geometry adjustments, roller rockers, Timken Cam bearings,
Logged

HILLSIDECYCLE.COM

  • Banned
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2085
Re: 110 tear down ?'s
« Reply #2 on: August 31, 2011, 07:02:48 AM »
Quote from: Big C. on August 30, 2011, 10:54:57 PM
  Guy's I need some advice.  My 09 110 is being torn down due to bad finish on the cases and wanted to know what we should do at a minimum while were in there? Currently running a TW-7H woods cam and directional roller lifters with a D&D Boss 2 into 1 loud baffle.  I was thinking I'll have the crank checked and welded if its good and the 10.5 pistons with an .030 head gasket.  Anything else I should look at.  I'm assuming the dealer will resurface/deck the heads if they don't I'll add that to the list.  Just want to try to due it right but not go overboard with the budget.

                                                                      Thanks Again,
                                                                               Cory

Does your local dealer have an in-house machine shop??
Scott
Logged

gmills

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 108
  • from the new jersey shore
Re: 110 tear down ?'s
« Reply #3 on: August 31, 2011, 09:53:01 AM »
its a good idea to weld and pro plug send the crank to Darkhorse Crank Works (hoban bros.)

Logged
moose aka glenn at the New Jersey Shore

Keats

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2642
  • Do not be led astray

    • CVO1: 2008 FLHTCUSE3
    • CVO2: 2003 FXSTDSEI
Re: 110 tear down ?'s
« Reply #4 on: August 31, 2011, 10:08:47 AM »
Quote from: Deweysheads on August 31, 2011, 12:32:16 AM
Timken Cam bearings,

???

Maybe Timkin lefty main Bearing.......Cam?




Logged
Formally FLHTCUSE3
SoA #99.9            "Never say Die"
SEST,   open A/C , dyno tuned, D&D Fatcats 2 into 1 ceramic coated, new SE CNC Ported and coated Heads with 2.120 intake valve, SE camplate,
Jims SE Crank "Darkhorsed", Timkin conversion, Andrews 54H cams, Arnott Air shocks, intimidator front valves, HID headlights, LED turn signals, Moto Lights,  Zumo 550, SE compensator.

CVOThunder

  • Retired avionics squid 1984-2004
  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 972
Re: 110 tear down ?'s
« Reply #5 on: August 31, 2011, 11:18:09 AM »
Quote from: Keats on August 31, 2011, 10:08:47 AM

???

Maybe Timkin lefty main Bearing.......Cam?



Wondered that myself. New Torringtons for the cams?
Logged
2020 Road Glide Limited, 131" kit
2007 Softail Custom
2015 Road Glide Special, denim traded
2011.5 Big Blue Screamin’ Eagle Ultra Classic traded

Big C.

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 240

    • CVO1: Stardust Silver & Platinum Dust FLTRSE3
Re: 110 tear down ?'s
« Reply #6 on: August 31, 2011, 08:43:50 PM »
Quote from: Hillsidecycle.com on August 31, 2011, 07:02:48 AM
Does your local dealer have an in-house machine shop??
Scott
  Checked with dealer today and they have no in house machine shop.
Logged

HILLSIDECYCLE.COM

  • Banned
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2085
Re: 110 tear down ?'s
« Reply #7 on: September 01, 2011, 06:53:28 AM »
Seacoast, or Manchester H-D?
Scott
Logged

Big C.

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 240

    • CVO1: Stardust Silver & Platinum Dust FLTRSE3
Re: 110 tear down ?'s
« Reply #8 on: September 01, 2011, 08:36:11 AM »
Quote from: Hillsidecycle.com on September 01, 2011, 06:53:28 AM
Seacoast, or Manchester H-D?
Scott
Nashua H-D.
Logged
 

Page created in 0.221 seconds with 21 queries.