www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Numbers  (Read 1014 times)

0 Members and 1 Guest are viewing this topic.

Montanakid

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 207
Numbers
« on: January 10, 2012, 10:25:04 PM »
2010 SESG. When bought new I had Hi Comp pistons bringing to 10.5.1, E259 cams Sert and Bub 7 TDX pipes installed thinking that would be a safe way to go with engine mods if they were harley parts. The dealer could not get rid of a decel pop so I took to and INDY and was talked into a PC 5, for the most part the pop is gone andI get good mileage as long as Im easy on the throttle.
Just wondering with what I have is ,107 hp and 111 torque decent numbers? As far as the pipes go I would like a little more sound at idle but other than that it seems to be great.Thanks for  any thoughts.
Logged
S&S T 124 LC Engine
D&D Borzilla Eghaust
Horsepower Inc Throttle Assembly
Hawg Wired 6 Pack System
Progressive Monotubes Front
Progressive 440's Rear

Boxman88

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 144

    • CVO1: 2016 CVO Road Glide Ultra
    • States
Re: Numbers
« Reply #1 on: January 10, 2012, 10:50:37 PM »
Not bad. I have 118 lbs torque and 111 hp. High compression pistons and cam work done before I picked it up. V H "x" header and 4" High Output exhaust. The sound is great. Sounds better than the Reinhardt's i had on my 07 Street Glide. My salesman put his in the shop last week and put the same exhaust on his. He was impressed. Good Luck.
Logged
Charcoal Slate / Carbon Dust
HD Super Tuner / Custom Map
VH Power Duals / H.O. Slip On's
121 Torque 111 Hp
Progressive Monotubes Front
Progressive 944 Rear

HILLSIDECYCLE.COM

  • Banned
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2085
Re: Numbers
« Reply #2 on: January 11, 2012, 04:56:51 PM »
Forum member Chuck R, went 116/125 STD, with only a set of Wood 777 cams, our Stage II, OE heads, and a Fullsac exhaust, and a good tune by Russ @ Lone Wolf Performance, Vancouver Island. :)
Scott
Logged

cvo1717

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 673
    • NY


    • CVO1: 2013 CVO BREAKOUT BLACK SOLD
    • CVO2: 2010 CVO FATBOB BLACK DENIM HELLFIRE FLAMES TRADED IN
    • CVO3: 2020 CVO street glide
Re: Numbers
« Reply #3 on: January 11, 2012, 09:22:07 PM »
how much power is too much for the  stock crankcase bearing?Heard it should be upgraded when making a decent amount of power.The 120 crate motor from harley has a upgraded one.
Logged
Mike
2013 CVO BREAKOUT 117 KIT
ROSAS HEADS WOODS TW 8-6 CAM
RB RACING 2 INTO 1 PROSTOCK CHALLENGE PIPE
130 HP  134 TQ STD
126 hp   131 TQ SAE

HILLSIDECYCLE.COM

  • Banned
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2085
Re: Numbers
« Reply #4 on: January 12, 2012, 07:13:55 AM »
No worries in that area.
Scott
Logged

cvobiker

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2643
Re: Numbers
« Reply #5 on: January 12, 2012, 08:35:49 AM »
Quote from: cvo1717 on January 11, 2012, 09:22:07 PM
 
how much power is too much for the  stock crankcase bearing?Heard it should be upgraded when making a decent amount of power.The 120 crate motor from harley has a upgraded one.

If its a Jim's motor??, about 50 HP/TQ.    :huepfenjump3:
« Last Edit: January 12, 2012, 08:37:22 AM by cvobiker »
Logged
 

Page created in 1.782 seconds with 25 queries.