Topic: Heavy Breather Instalation problems (Read 761 times)

budsgalore · « **on:** March 11, 2012, 08:20:25 PM »

Hi All
I am installing a SE Heavy Breather 29299-08 got every thing perfect except the Filter. First I can't believe they give 2 sided tape to stick the chrome collar to the filter. Well it isnt sticking I thought I removed the oil from the rubber so that the double sided tape would stick and it did till I started tightening the hose clamp. The band around the clamp put pressure and pulled the double sided tape away. The clamp seems to be a little too wide where it s banded.
Any sugestions what to do now, anyone else ever have this problem? All I can think of is to glue it, screw it or leave it off(ugly)
If I should glue it what would work best?
Thanks Buds

mark · « **Reply #1 on:** March 11, 2012, 10:13:14 PM »

Harley parts I've bought that had double-sided tape didn't hold well either. I replaced the Harley tape with the double-sided 3-M tape that's used to adhere auto body trim pieces. Nothing has come off yet.

budsgalore · « **Reply #2 on:** March 12, 2012, 01:05:03 AM »

Thanks might try that

Author Topic: Heavy Breather Instalation problems (Read 761 times)

budsgalore

Heavy Breather Instalation problems

mark

Re: Heavy Breather Instalation problems

budsgalore

Re: Heavy Breather Instalation problems