Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[HarlyFan]

I want to remove my passenger pillion and run just with the solo. My question is there a better looking fix so you don't have to see the hardware sticking up on the back of the seat where the pillion connects to the solo?

[15CVOSG]

did you try pulling the rear lap over the hardware...should not be visible then...

[PeterJ]

Dont forget the little chromre plastic stud under the pillion seat to put into the bolt hole on the fender. |A nice little touch.
 

[MooseAmos]

did you try pulling the rear lap over the hardware...should not be visible then...

HarlyFan:  I have run with the solo saddle 90% of the time & initially had the same question but 12CVOSG is spot on--just slightly stretch/pull the rear flap of the seat over the 2 vertical bolt studs/nuts and eventually after you put a few miles on the solo the leather will "conform" & you won't see the hardware again.  I'm working towards the real solution which is to get rid of the crappy CVO seat altogether & replace it with a quality Corbin Hollywood Solo...   

[HarlyFan]

Thanks everyone for the suggestions I will try as soon as I get home!

[Orthobill13]

I found the flap and included chrome button a really nice touch!

[Chicky]

I took the passenger seat off upon pick-up.  The chrome spears on the back fender are really a cool look.   The seat flap does do the trick to hide the hardware.   I added a chopped tour pack and left off the passenger pad; put some black rubber plugs in the pad holes and that did the trick for a minimal look.

[MooseAmos]

I took the passenger seat off upon pick-up.  The chrome spears on the back fender are really a cool look.   The seat flap does do the trick to hide the hardware.   I added a chopped tour pack and left off the passenger pad; put some black rubber plugs in the pad holes and that did the trick for a minimal look.

x2--Concur, the solo seat is a great look w/ the spears...

[Sierramadre]

Dont forget the little chromre plastic stud under the pillion seat to put into the bolt hole on the fender. |A nice little touch.
 

Thanks for the tip!  It's a great little touch. Maybe there's hope for Harley after all.

[flibb]

Dont forget the little chromre plastic stud under the pillion seat to put into the bolt hole on the fender. |A nice little touch.
 

how in the world did you figure that one out.  Ive seen so many that just stick the screw back in there.  LOL I just went out and low and behold the pastil stud and it looks pretty good.  Thanks

[bhtko]

Dont forget the little chromre plastic stud under the pillion seat to put into the bolt hole on the fender. |A nice little touch.
 

Thanks for the tip... I just figured out what you were talking about!

[PeterJ]

Thanks for the thanks. 

[africa al]

Take a look at the C & C seats. For me good quality finish and comfortable. Company easy to deal with and pretty quick shipping times to the UK.