Topic: Looking for FLHXSE 2/3 owners who have done this (Read 749 times)

Mr D · « **on:** June 11, 2012, 09:28:40 AM »

Lowered the front end to match the low profile rear, Jerry here (grc) was gracious enough to post that the CVO fork part # is different than than the non CVO, but still has a standard height spring. Wanting to this job only if it does not hinder front end operation.

Thanks in advance Riders.

Tom

PASN YU · « **Reply #1 on:** June 11, 2012, 09:57:06 AM »

I did the Progressive Monotubes 1" drop in the front. I've ridden everywhere from high speed highway/sweepers to riding the Dragon with no issues. Do not do the 2" drop in front as the oil cooler will hit the fender on a good bump.

Mr D · « **Reply #2 on:** June 11, 2012, 10:00:18 AM »

Quote from: PASN YU on June 11, 2012, 09:57:06 AM

I did the Progressive Monotubes 1" drop in the front. I've ridden everywhere from high speed highway/sweepers to riding the Dragon with no issues. Do not do the 2" drop in front as the oil cooler will hit the fender on a good bump.

Thanks for the response

Also, Which fork oil weight did you use

PASN YU · « **Reply #3 on:** June 11, 2012, 10:24:24 AM »

Type E Harley fork oil - 99884-80

Author Topic: Looking for FLHXSE 2/3 owners who have done this (Read 749 times)

Mr D

Looking for FLHXSE 2/3 owners who have done this

PASN YU

Re: Looking for FLHXSE 2/3 owners who have done this

Mr D

Re: Looking for FLHXSE 2/3 owners who have done this

PASN YU

Re: Looking for FLHXSE 2/3 owners who have done this