www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: 68 tooth 1 1/8" rear pulley  (Read 4233 times)

0 Members and 1 Guest are viewing this topic.

ltank

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1214
    • LA

    • CVO1: 2000 FXR4 S&S V111, CustomS.S. 2-1 exhaust, Primo-Rivera OD 6 speed, 49mm Custom Front End Ohlins 30mm Fork cartridges , Hyperpro Shocks, Barnett Scorpian Clutch
    • CVO2: 1983 88" Shovelhead Won the World of Wheels 1985 Sept 85 Issue of Hot Bike Mag
    • CVO3: 1989 FXRS, 1990 Custom 100" Shovelhead/ EVO
68 tooth 1 1/8" rear pulley
« on: May 16, 2012, 04:51:41 PM »
Does anyone know the part number for a 68 tooth 1 1/8" wide rear pulley? Is the same part number as the 68 tooth pulley from a Sportster?
Thanks
Ltank
Logged

Dan_Lockwood

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2497
Re: 68 tooth 1 1/8" rear pulley
« Reply #1 on: May 16, 2012, 08:09:12 PM »
I'm not certain, but the '08 and newer touring bike have the cush drive rear sprockets with rubber absorbers built into the hub and sprocket.

Sportster sprockets would not work on the newer FL's

If you want the part number for a Sprocket for a Sportster, can't help. What good am I right?

I'm sure someone will be a help other than me just padding my post count............
Logged
Dan

2009 SERG Orange / Black
Board Track Racer Project, Ultima 113"/6spd
2021 Coleman UT400 Side By Side

grc

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 14216
  • AKA Grouchy Old Fart
    • IN


    • CVO1: 2005 SEEG2
Re: 68 tooth 1 1/8" rear pulley
« Reply #2 on: May 16, 2012, 08:12:47 PM »

The following are 68 tooth sprockets.  I don't know if either of them will bolt up to your wheel.

2006 Sporty - 40350-04
2006 Dyna Low Rider - 40535-06


Jerry
Logged
Jerry - 2005 Cherry SEEG  -  Member # 1155

H-D and me  -  a classic love / hate relationship.  Current score:  love 40, hate 50, bewildered 10.

ltank

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1214
    • LA

    • CVO1: 2000 FXR4 S&S V111, CustomS.S. 2-1 exhaust, Primo-Rivera OD 6 speed, 49mm Custom Front End Ohlins 30mm Fork cartridges , Hyperpro Shocks, Barnett Scorpian Clutch
    • CVO2: 1983 88" Shovelhead Won the World of Wheels 1985 Sept 85 Issue of Hot Bike Mag
    • CVO3: 1989 FXRS, 1990 Custom 100" Shovelhead/ EVO
Re: 68 tooth 1 1/8" rear pulley
« Reply #3 on: May 16, 2012, 08:46:19 PM »
Ok Great!i will research the bolt patterns and talk to the Indy bike shop I use before buying. You have been very helpful.
Thanks,
Ltank
Logged
 

Page created in 0.118 seconds with 21 queries.