www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: HDBOMM install question  (Read 1333 times)

0 Members and 1 Guest are viewing this topic.

iwamas

  • Newbie
  • *
  • Offline Offline
  • Posts: 17
HDBOMM install question
« on: December 21, 2011, 04:04:54 AM »
Hi all,

I reieved and installed the HDBOMM unit into my 2012 Ultra CVO yesterday, and couldn't get the microphone to work on cellular calls.  my unit came with a 3.5mm jack instead of a 2.5mm jack and so i bought a 3.5mm to 2.5mm adapter in order to plug it into the microphone jack of the Zumo 660.  everything else about the install was 100% according to the instructions.  Anyone have any ideas for me to try out in order to get this to work?

Thank in advance,

Ash

EDIT:  anyone know how hard it would be to take this thing apart and replace the 3.5mm jack that came with it with a 2.5mm one?  and any specific 2.5mm one? (does it have to be a mic jack? mono or stereo? ect..)
« Last Edit: December 21, 2011, 06:08:55 AM by iwamas »
Logged

bissjim

  • Vendor
  • Elite CVO Member
  • *
  • Offline Offline
  • Posts: 731
Re: HDBOMM install question
« Reply #1 on: December 21, 2011, 06:25:00 AM »
Ashraf do not take it apart you will end up breaking the circuit board.

See my email responses to you. I will take care of you via email.

Jim

Logged
Ride It Like You Are Retired

iwamas

  • Newbie
  • *
  • Offline Offline
  • Posts: 17
Re: HDBOMM install question
« Reply #2 on: December 21, 2011, 06:34:28 AM »
Thanks Jim,

Email received, will contact you once i verify what you asked : )
Logged

jamescode3

  • Newbie
  • *
  • Offline Offline
  • Posts: 35

    • CVO1: 2012 Harley-Davidson FLHTCUSE7 CVO Ultra Classic Electra Glide
    • CVO2: 2007 Harley-Davidson FLHTCUSE2 Screamin' Eagle Ultra Classic Electra Glide
Re: HDBOMM install question
« Reply #3 on: March 02, 2012, 07:52:53 PM »
Installed my HDBOMM a few weeks ago and it works great. Thanks Jim
Logged

FLHTCUSE7

  • Guest
Re: HDBOMM install question
« Reply #4 on: May 24, 2012, 09:40:47 PM »
installing mine tomorrow,,,,,, :drink:
Logged

bissjim

  • Vendor
  • Elite CVO Member
  • *
  • Offline Offline
  • Posts: 731
Re: HDBOMM install question
« Reply #5 on: May 25, 2012, 07:37:28 AM »
Quote from: jamescode3 on March 02, 2012, 07:52:53 PM
Installed my HDBOMM a few weeks ago and it works great. Thanks Jim


You are welcome and I am sorry about that 3.5mm plug that sneaked into the 2.5mm parts bin, at night during a full moon.  :oops:  I did end up looking at over 300 of the 2.5mm cables just to make sure there were no other 3.5mm cables mixed up with the 2.5mm cables. The factory must have made a mistake when they packed them up. At least that is my story and I am sticking with it until the magic mirror tells me differant.  :cherry:

www.hdbomm.com

Jim
Logged
Ride It Like You Are Retired
 

Page created in 0.128 seconds with 25 queries.