www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Are there any after market seats available for these yet?  (Read 1719 times)

0 Members and 1 Guest are viewing this topic.

jtsgro

  • Newbie
  • *
  • Offline Offline
  • Posts: 6
Are there any after market seats available for these yet?
« on: July 05, 2012, 03:20:51 PM »
I have a 2012 and was wondering if anyone was aware of any aftermarket Corbin, La Pera, or mustang seats available for them out on the market?
Logged

Hutch-fg

  • Newbie
  • *
  • Offline Offline
  • Posts: 7
Re: Are there any after market seats available for these yet?
« Reply #1 on: July 07, 2012, 02:31:42 AM »
Take your stock seat and get it fitted to your butt.  Check out rich's custom seats.  
« Last Edit: July 22, 2012, 04:12:58 AM by Hutch-fg »
Logged

Hutch-fg

  • Newbie
  • *
  • Offline Offline
  • Posts: 7
Re: Are there any after market seats available for these yet?
« Reply #2 on: July 22, 2012, 03:55:53 AM »
At first glance my seat looks stock but it has been completely redone with added foam, gel pads and reshaped to fit my butt.  Rich used the original buffalo inserts and new leather to remake the seat cover.

« Last Edit: July 22, 2012, 04:11:12 AM by Hutch-fg »
Logged

Lever

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1482
  • keep the rubber side down
Re: Are there any after market seats available for these yet?
« Reply #3 on: July 23, 2012, 07:46:16 PM »
i have got a sundowner  seat for sell
Logged
2010 CVO Convertible  crimson red sunglo/Autumn Haze with Metal Grind Graphics
2014 113  motor 10.8 compression
SAE smoothing #5  125.7 hp / 122.9 tq
2017 Road King M8
stage IV

CVO Dogg

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • Make yourself visable on the road !
    • Harley-Davidson club of South Africa
Re: Are there any after market seats available for these yet?
« Reply #4 on: July 28, 2012, 01:00:54 AM »
I got a Mustang Sport Touring and Pillion seat. With a small modification, it fits perfectly and my butt is eternally greatfull ! The problem is the ECU unit which prevents the riders seat from sitting properly. I had to cut a section out of the seat pan (about 50 x 70 mm) and it sits on the rubber stoppers. For the pillion seat to be mounted you have to remove the three strips of plastic trim - use a heat gun and the come off like a dream. The stock pillion seat is good or about 5 miles so if you plan on carrying a pillion, you have to make the change.

If anyone is interested, I can post some photos ...

Love this machine, bit it is far from perfect from the factory !
« Last Edit: July 28, 2012, 01:18:55 AM by CVO Dogg »
Logged

SteveO

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 140

    • CVO1: 2012 FLSTSE3
    • CVO2: 2008 FLHTCUSE3
Re: Are there any after market seats available for these yet?
« Reply #5 on: August 03, 2012, 10:59:28 PM »
Corbin has a seat for the 2012.
Logged

prstaples1911

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 81
Re: Are there any after market seats available for these yet?
« Reply #6 on: September 13, 2012, 12:13:52 PM »
Quote from: SteveO on August 03, 2012, 10:59:28 PM
Corbin has a seat for the 2012.

I called yesterday and they indicated they would not guarantee a fit for the 2012 as it was fitted to a 2010 and 2011 model.  Are you speaking about a specific seat and do you know it will fit?  I sure would like something with a little more scoop in it.  I am getting hot spots on trips as short as 20 minutes.
Logged

SteveO

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 140

    • CVO1: 2012 FLSTSE3
    • CVO2: 2008 FLHTCUSE3
Re: Are there any after market seats available for these yet?
« Reply #7 on: October 09, 2012, 08:32:39 PM »
Logged
 

Page created in 0.265 seconds with 21 queries.