Topic: Fullsac Headpipe only? (Read 1093 times)

jmhenrie · « **on:** July 04, 2012, 10:20:08 AM »

Has anyone just pipe on a fullsac headpipe (c) with a fuel tuner and kept there original exhaust on their 110's? I tend to like the quietness of the stock pipes but would like to try and cool the motor down a little and hopfully improve throttle response.
What would i gain if i switched to the fullsac 2 inch baffle? or a set of Vance and Hines ovals?
Thanks for any Information
Mike

MDUltra · « **Reply #1 on:** July 04, 2012, 10:29:15 AM »

I had the same concerns about noise. I did the 2" baffle and X pipe thinking I could re install the factory baffle ifI I thought it was too loud. I love the sound! Quiet until you open it up Not to loud, nice deep tone!

mjb765 · « **Reply #2 on:** July 04, 2012, 10:47:57 AM »

Never heard anybody complain that the Fullsac 1.75" cores were too loud.

Cvostu · « **Reply #3 on:** July 04, 2012, 11:00:50 AM »

I have the 2". Not too loud at all. They are just right and came highly recommended from steve when I asked the same thing. I didn't want loud. But he told me the 2" was the way to go. So I listened this time. Great choice for me.

HOGMIKE · « **Reply #4 on:** July 04, 2012, 02:05:37 PM »

I used the Fullsac X-pipe and CVO mufflers on my 103", I was concerned about the noise bouncing off my trailer and being too loud.
After many miles, the 1 3/4"cores and new packing makes long days on the road very pleasant.
JMHO

D-N-D · « **Reply #5 on:** July 04, 2012, 02:11:39 PM »

Fullsac 2" cores the way to go.

Author Topic: Fullsac Headpipe only? (Read 1093 times)

jmhenrie

Fullsac Headpipe only?

MDUltra

Re: Fullsac Headpipe only?

mjb765

Re: Fullsac Headpipe only?

Cvostu

Re: Fullsac Headpipe only?

HOGMIKE

Re: Fullsac Headpipe only?

D-N-D

Re: Fullsac Headpipe only?