Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[bissjim]

The SESG does not have the 6A and 6B connector which the NIM uses. No problem you can make a Y connector for your bike which will add the connectors you need. This is what the wiring should look like.

[miceracs]

   I have similar issues.
when receiving road direction changes from the Road Tech, sometimes the mic stays on. Although Doris has finished telling me which road to take.
Also, the mic volume is on full gain when this happens which makes it ultra sensative to engine noise, etc.

CB is not switched on.
Radio is on.

Is this the same problem as above?

[bissjim]

Yes, same problem. NIM is bad.

[HD Jim]

Well so far my research shows even if I get Harley to put in a new NIM the issue will not be fixed.  It looks to me like there is a major design flaw that causes this issue.  Well I have an extended warranty hope it continues to cover the issue.

[bissjim]

You have to replace with a good NIM. Not saying the replacement will be good or not. Had one customer who went through 3 NIM's before the problem was fixed. His biggest problem was getting Harley to replace the NIM 3 times. Good thing he worked for a dealer.

Remove the NIM and the issue will be resolved. Old saying "eliminate all other possibilities and what remains must be the truth". It is a NIM issue.

Jim