Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Will my 09 Stock catless header work on my new 12 CVO SG?  (Read 1169 times)

0 Members and 1 Guest are viewing this topic.

Jswerve

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4150

    • CVO1: 2012 FLHXSE3
Will my 09 Stock catless header work on my new 12 CVO SG?
« on: November 10, 2012, 10:03:30 PM »

I have a 2009 stock headpipe I took off of my Street Glide in my shed. I know this is a catless pipe so I was wondering if it would work with my new CVO SG? If so, is it worth the trouble or would you just scratch it and go with something else like the fullsac x pipe?
Logged


2012 FLHXSE3 Ruby Red/Typhoon Maroon
|Color Matched Detachable Tour Pak | Fuelmoto PV | Dragos 580 cams | Dragula 2-1/Ghost Pipe | Cyclesmith 13's | Sachs heads | Yaffe Stealth III License Plate Frame| Long Angled High

YELLOWBIRD

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 799
    • VA


    • CVO1: 2009 CVO ROADGLIDE
Re: Will my 09 Stock catless header work on my new 12 CVO SG?
« Reply #1 on: November 10, 2012, 10:56:21 PM »


If I'm correct, you can use the 2009 stock head pipe but have to switch out the bungs as well. The bungs are located closer to the
heads.

Per some, the 2009 stock non cat pipes work pretty darn good.

However, buying a Fullsac X-pipe, it will fit perfect, is power coated, have 3 choices from the "B", "C", and the "sports-tour",
uses the stock header and Steve will give you a great map for it too.

Most of the folks on this site use the "Fullsac set-up for a reason!   :P :huepfenjump3:


Ride Safe,

YELLOWBIRD

Logged
2009 SCREAMIN' EAGLE CVO ROAD GLIDE FLTRSE3 117" PRO RACE
(1 OF ONLY 369 US) "LAST YEAR OF THE HAND BUILT"

Jswerve

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4150

    • CVO1: 2012 FLHXSE3
Re: Will my 09 Stock catless header work on my new 12 CVO SG?
« Reply #2 on: November 11, 2012, 12:19:34 AM »

If I'm correct, you can use the 2009 stock head pipe but have to switch out the bungs as well. The bungs are located closer to the
heads.

Per some, the 2009 stock non cat pipes work pretty darn good.

However, buying a Fullsac X-pipe, it will fit perfect, is power coated, have 3 choices from the "B", "C", and the "sports-tour",
uses the stock header and Steve will give you a great map for it too.

Most of the folks on this site use the "Fullsac set-up for a reason!   :P :huepfenjump3:


Going to sell the 09 pipe then use it towards the full sac sleeper kit!


Ride Safe,

YELLOWBIRD


Logged


2012 FLHXSE3 Ruby Red/Typhoon Maroon
|Color Matched Detachable Tour Pak | Fuelmoto PV | Dragos 580 cams | Dragula 2-1/Ghost Pipe | Cyclesmith 13's | Sachs heads | Yaffe Stealth III License Plate Frame| Long Angled High

HOGMIKE

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2436
  • 65 FLH 93" + others
Re: Will my 09 Stock catless header work on my new 12 CVO SG?
« Reply #3 on: November 11, 2012, 09:28:35 AM »

If I'm correct, you can use the 2009 stock head pipe but have to switch out the bungs as well. The bungs are located closer to the
heads.

Per some, the 2009 stock non cat pipes work pretty darn good.

However, buying a Fullsac X-pipe, it will fit perfect, is power coated, have 3 choices from the "B", "C", and the "sports-tour",
uses the stock header and Steve will give you a great map for it too.

Most of the folks on this site use the "Fullsac set-up for a reason!   :P :huepfenjump3:


Ride Safe,

YELLOWBIRD




Good advice, go with a proven setup.
One time, do it right, enjoy the ride!
JMHO, of course!
Logged
HOGMIKE

scttgr8

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 279
  • my new GLIDE

    • CVO1: 2012 FLTRXSE
Re: Will my 09 Stock catless header work on my new 12 CVO SG?
« Reply #4 on: November 11, 2012, 09:41:34 AM »

 ...yes the 09 will fit but the o2 sensors are different.... :2vrolijk_21: :bananarock: agree on the fullsac  :2vrolijk_21:
Logged
2012 HD Road Glide Custom CVO (FLTRXSE) Candy Cobalt/Twilight Blue with Real Smoke Graphics I added wrapped chrome license plate bracket/cover, saddlebag guard rails, replaced black Engine covers w/Chrome, RCx slip-ons mounted on Fullsac "C" X head pipe, TTS tuner tuned! Enjoying life ...living the dream!!!
 

Page created in 0.212 seconds with 21 queries.