Topic: 2007 FLHTCUSE2 Measurements (Read 1075 times)

Tony Miller · « **on:** February 02, 2013, 04:56:18 PM »

Does anybody happen to know, or plan to have your controls off soon to measure, the inner diameter of the handlebars?
I need to get a small container to hold ashes and it will need to fit in the bars.

If you have the measurements I would appreciate the knowledge.

sadunbar · « **Reply #1 on:** February 02, 2013, 05:46:25 PM »

Quote from: Tony Miller on February 02, 2013, 04:56:18 PM

Does anybody happen to know, or plan to have your controls off soon to measure, the inner diameter of the handlebars?
I need to get a small container to hold ashes and it will need to fit in the bars.

If you have the measurements I would appreciate the knowledge.

.750 (3/4") will fit fine. The i.d. measures .795/.805. (not entirely round). I have a set hanging on my shop wall that I measured.

Tony Miller · « **Reply #2 on:** February 02, 2013, 08:11:04 PM »

Thank you very much!
That is the exact information I needed.

Author Topic: 2007 FLHTCUSE2 Measurements (Read 1075 times)

Tony Miller

2007 FLHTCUSE2 Measurements

sadunbar

Re: 2007 FLHTCUSE2 Measurements

Tony Miller

Re: 2007 FLHTCUSE2 Measurements