Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[hdaliaconis]

Does anyone know what the stock 110CI CVO SE8 engine configuration is?  I mean beyond the specs in the owner manual?  Cams, Heads, Compression, etc? 

Thanks.

[prodrag1320]

4 bore x 4.375 stroke ,9.2-1 static compression.2.060 int/1.700 ex (not 100% sure on the valve sizes,but thats what i remeber last set I did)

[grc]

Does anyone know what the stock 110CI CVO SE8 engine configuration is?  I mean beyond the specs in the owner manual?  Cams, Heads, Compression, etc? 

Thanks.

It's basically the same as it has been throughout the life of the CVO 110 engine.  The cam is the 255, specs for it are in the SE catalog.  The heads are the same open chamber heads, the compression is approximately 9.2 : 1.  So what exactly are you looking for?  I thought this question was answered in the last thread you started, so perhaps you need to explain exactly what details you are looking for so someone can provide the answer you seek.

Jerry

[hdaliaconis]

It's basically the same as it has been throughout the life of the CVO 110 engine.  The cam is the 255, specs for it are in the SE catalog.  The heads are the same open chamber heads, the compression is approximately 9.2 : 1.  So what exactly are you looking for?  I thought this question was answered in the last thread you started, so perhaps you need to explain exacntly what details you are looking for so someone can provide the answer you seek.

Jerry

Yes, it was answered in the original thread.  The question was moved to the Twin Cam topic and I believe that is why you see it again.  What I was looking for was a starting TTS calibration for the "stock CVO SE8" engine.  I was confused by the TTS Calibration tables that show a 1800 cc cal and another one showing 1800 cc CVO calibration. 

Thanks for all the help.  I will use the ETA044-03 calibration as a starting point.

[Unbalanced]

2.080 intakes not 2.060 and 1.623 ex not 1.700  , most heads cc out at 94/95 cc

I will use the ETA044-03 calibration as a starting point.

[HILLSIDECYCLE.COM]

Does anyone know what the stock 110CI CVO SE8 engine configuration is?  I mean beyond the specs in the owner manual?  Cams, Heads, Compression, etc?  

Thanks.

9.2 cr
2.080" in. valves
1.620" ex. valves
255 school-bus cam
Scott

[hdaliaconis]

Thanks, for all the help!