Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[flhtcuse6]

2011 FLHTCUSE6
my key fob unlock/lock quit working if the ignition is in off position.
if i manually unlock the ignition switch and turn to run positon the key fob will lock/unlock fine.
if i turn the switch back to off.   fob lock/unlock doesn't work.
this started yesterday, i replaced the batteries.  no good.
any ideas  ??

[TLSSRS]

I have a 11 blue & my key fobs have never worked good, sometimes they work & sometimes they don't. I just lock it with the manual switch & hope it stays locked.

[flhtcuse6]

that's about the same for me.  blue also.  23,700 miles.   i guess it just finally quit. 
i'm gonna work on it some tomorrow (check wiring, connections, etc) 
i'll let you know if i figure a magic repair.

at least the stupid alarm fob still works.  it screams if i try to unlock it without the security thing nearby.

thnks.
....Mike

[flhtcuse6]

Now the  POWER LOCK manual switch on the fairing quit working.
I have the service manual and POWER LOCKS are not even mentioned. (the owner manual does, but isn't detailed enough)
I have a FLHTCUSE6 and need the schematic for the POWER LOCK circuit.
I checked all the fuses and none are blown.

Any help out there ??
Using the key manually sucks after years of "key fob"..

thanks.
.............Mike

[flhtcuse6]

the  POWER LOCK manual switch on the fairing quit working.
I have the service manual and POWER LOCKS are not even mentioned. (the owner manual does, but isn't detailed enough)
I have a FLHTCUSE6 and need the schematic for the POWER LOCK circuit.
I checked all the fuses and none are blown.

Any help out there ??
Using the key manually sucks after years of "key fob"..

thanks.
.............Mike

[flhtcuse6]

I figured it out.
With the electronic power locks the ignition switch on the fairing also has some electronics to lock/unlock the ignition.
There is small wrapped wire bundle (2 wires) that goes up inside the switch. (realclose to where you would insert the key)  The wire goes from the fairing up into the switch.  Apparently it got tangled up in the spring inside the switch and one of the wires broke.  It broke up inside the switch and there is not enough room to get inside and fix or splice (heck)

I disconnected this circuit (unplugged it) and now everything works fine.. Well, now i have to use the key to manually lock/unlock the ignition switch.

[Rooster]

At least Manual is still an option.