Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Camojeeper]

Ok so I've been cleaning out the shop an ran across a set of 96" Pistons,heads,jugs. With 9,000 miles. They came off my old 07 for a SE 110" kit.
So here's my ? If bolted on an 88" lower end would they be 96" or something else? Also what do you think they would be worth?
Thanks Steve

[wfolarry]

You could use the jugs & heads but not the pistons.
Cylinders are cheap.
The heads usually go for around $150 on fleabay.

[HILLSIDECYCLE.COM]

Ok so I've been cleaning out the shop an ran across a set of 96" Pistons,heads,jugs. With 9,000 miles. They came off my old 07 for a SE 110" kit.
So here's my ? If bolted on an 88" lower end would they be 96" or something else? Also what do you think they would be worth?
Thanks Steve

You can bore those cylinders to 98", and with flatops pistons under the advertised 85cc chambers, it'll hover at about 9.5 cr.
At that point, there is a multitude of cams out there that'll work, with even more being dreamed up every day.
Addressing the cylinder heads will just bring even more.
Scott

[Camojeeper]

I have a 110"
Scott these were old take off parts. Just wondering could some one bolt Em on an 88" as like a Big bore kit? Or are they just flea bay parts?

[JohnCA58]

the 88 and 96 cylinders are the same,  no advantage to putting these on the 88. 

[Camojeeper]

So the 96" and the 88" have the same cyl bore?

[prodrag1320]

So the 96" and the 88" have the same cyl bore?

yes,(3.750")the 96" get the inches over the 88" with a .375 longer stroke

[HILLSIDECYCLE.COM]

I have a 110"
Scott these were old take off parts. Just wondering could some one bolt Em on an 88" as like a Big bore kit? Or are they just flea bay parts?

Wrist pin C/L location of the 96" pistons is .187" closer to the piston deck and will not work on top of the 4" arm 88" crank unless a custom cylinder was used, but both are 3.750" holes.
We have a HUGE amount of very good 95" take-off pistons that would require a new ring set....
Scott

[Camojeeper]

Thank you guys for your knowledge.
I will just put the parts up for sale on ebay


Sent from my iPhone using Tapatalk

[Camojeeper]

Nevermind