Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 ... 5 6 [7] 8 9 ... 13

Author Topic: "How To" HK 06 and up Aux Jack to back of radio  (Read 88161 times)

0 Members and 2 Guests are viewing this topic.

kjc625

  • Newbie
  • *
  • Offline Offline
  • Posts: 6
Re: "How To" HK 06 and up Aux Jack to back of radio
« Reply #90 on: February 08, 2010, 02:05:16 AM »

Well I took every thing a part and was able to fix front jack. I put too much solder lead on them. I melted them and blew them away with air compressor. It works now. However I was not able to align the orange seal perfect. So I went to local Harley dealers to check other new bikes. Guess what the new bikes' radios were not perfect neither. So I am very happy with the final result.

thx once again
Jim
Logged

kjc625

  • Newbie
  • *
  • Offline Offline
  • Posts: 6
Re: "How To" HK 06 and up Aux Jack to back of radio
« Reply #91 on: February 09, 2010, 02:31:00 AM »

Here are the pictures.

First impression on Zumo 660.
Nice unit, starts fast, good MP3 player. Easy usage.
Fairing mount, clean installation, but GPS pointed some what outward than I wanted.

Rear AUX port works better than I expected (took me another 1 hour and half).
Boom cellphone connector, It works, but cellphone volume is somewhat low.

So far so good.


« Last Edit: February 09, 2010, 02:32:53 AM by kjc625 »
Logged

kjc625

  • Newbie
  • *
  • Offline Offline
  • Posts: 6
Re: "How To" HK 06 and up Aux Jack to back of radio
« Reply #92 on: February 09, 2010, 02:33:55 AM »

Here are the pictures.

First impression on Zumo 660.
Nice unit, starts fast, good MP3 player. Easy usage.
Fairing mount, clean installation, but GPS pointed some what outward than I wanted.

Rear AUX port works better than I expected. Boom cellphone connector, It works, but cellphone volume is somewhat low.

So far so good.



Logged

bissjim

  • Vendor
  • Elite CVO Member
  • *
  • Offline Offline
  • Posts: 731
Re: "How To" HK 06 and up Aux Jack to back of radio
« Reply #93 on: February 09, 2010, 07:06:05 AM »

Looks nice.

My experience has shown that there is a low volume issue some times and it is always assocciated with the 660.
Logged
Ride It Like You Are Retired

naitram

  • SMF Administrator
  • 10K CVO Member
  • ******
  • Offline Offline
  • Posts: 12665
    • MA


    • CVO1: FLTRXSE2 "Marvin"
Re: "How To" HK 06 and up Aux Jack to back of radio
« Reply #94 on: February 09, 2010, 09:49:43 AM »

how does the fairing mount install for the 660?
Logged
:cool26: naitram...


"I reject your reality and substitute my own."
"Work is the curse of the drinking class."

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50554
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: "How To" HK 06 and up Aux Jack to back of radio
« Reply #95 on: February 09, 2010, 09:54:41 AM »

how does the fairing mount install for the 660?

Your inner geek hasn't had its coffee yet.  Install PDF attached from the P&A website.
Logged

naitram

  • SMF Administrator
  • 10K CVO Member
  • ******
  • Offline Offline
  • Posts: 12665
    • MA


    • CVO1: FLTRXSE2 "Marvin"
Re: "How To" HK 06 and up Aux Jack to back of radio
« Reply #96 on: February 09, 2010, 09:58:19 AM »

Your inner geek hasn't had its coffee yet.  Install PDF attached from the P&A website.
still on my first :morningcoffee: thanks
Logged
:cool26: naitram...


"I reject your reality and substitute my own."
"Work is the curse of the drinking class."

naitram

  • SMF Administrator
  • 10K CVO Member
  • ******
  • Offline Offline
  • Posts: 12665
    • MA


    • CVO1: FLTRXSE2 "Marvin"
Re: "How To" HK 06 and up Aux Jack to back of radio
« Reply #97 on: February 09, 2010, 10:01:09 AM »

Drill a 5/16 inch (8 mm) diameter hole through the inner
fairing in the lower mounting location.
Drill an 11/16 (17 mm) diameter hole through the inner
fairing in the wire routing location.

thats a big hole for the wires
Logged
:cool26: naitram...


"I reject your reality and substitute my own."
"Work is the curse of the drinking class."

skreminegul07

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2446
  • FLHRSEI.ORG
    • MA


    • CVO1: 2017 Indian Chieftain Limited
Re: "How To" HK 06 and up Aux Jack to back of radio
« Reply #98 on: February 09, 2010, 03:43:26 PM »

Drill a 5/16 inch (8 mm) diameter hole through the inner
fairing in the lower mounting location.
Drill an 11/16 (17 mm) diameter hole through the inner
fairing in the wire routing location.

thats a big hole for the wires

It's because of the harness and grommet.  The wire connectors on the wire ends can take up a lot of space.
Logged
Any day on the bike is a good day.

naitram

  • SMF Administrator
  • 10K CVO Member
  • ******
  • Offline Offline
  • Posts: 12665
    • MA


    • CVO1: FLTRXSE2 "Marvin"
Re: "How To" HK 06 and up Aux Jack to back of radio
« Reply #99 on: February 09, 2010, 03:49:45 PM »

trying to decide how to mount mine, but not sure i want to drill a hole that big
Logged
:cool26: naitram...


"I reject your reality and substitute my own."
"Work is the curse of the drinking class."

skreminegul07

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2446
  • FLHRSEI.ORG
    • MA


    • CVO1: 2017 Indian Chieftain Limited
Re: "How To" HK 06 and up Aux Jack to back of radio
« Reply #100 on: February 09, 2010, 04:25:22 PM »

trying to decide how to mount mine, but not sure i want to drill a hole that big

I'm going with the handlebar mount.  I have the HogTunes HogPod ,so fairing mount is not an option.  You can always put a plastic plug in the hole, or glue/ silicone something like the CVO coin, or a pin, get creative!  Drill a smaller hole and forget the grommet. 

Logged
Any day on the bike is a good day.

nwemerys

  • Newbie
  • *
  • Offline Offline
  • Posts: 28
Re: "How To" HK 06 and up Aux Jack to back of radio
« Reply #101 on: February 13, 2010, 04:35:46 PM »

I posted this in a new thread as well, apologies for doubling up but it's V-day weekend and I'm on thin ice as it is.  Need to finish this project sooner rather than later...

OK, I am making a feable attempt at adding the aux port to the back of my radio.  I have the radio on the workbench but am unable to remove the top of it.  T8 screws (2) removed from the top as well as rear where the CB and GPS modules are attached.  The top wiggles but seems to be "catching" on the side where the black plastic heat radiant pices is attached.  Any help would be appreciated and thanks in advance!
Logged
Dave

94 Nostalgia
07 SE Ultra
     V&H Oval Slip-ons
     sert
     K&N air filter

nwemerys

  • Newbie
  • *
  • Offline Offline
  • Posts: 28
Re: "How To" HK 06 and up Aux Jack to back of radio
« Reply #102 on: February 13, 2010, 05:19:59 PM »

With a little help I have the top off the radio, drilled the hole and ready for soldering.  The RadioShack stereo 1/8 plug I have; when unwrapped, includes 3 wires...1 red, 1 black, and 1 bare.  Any thoughts as to which is common, and which is L/R??
Logged
Dave

94 Nostalgia
07 SE Ultra
     V&H Oval Slip-ons
     sert
     K&N air filter

kjc625

  • Newbie
  • *
  • Offline Offline
  • Posts: 6
Re: "How To" HK 06 and up Aux Jack to back of radio
« Reply #103 on: February 13, 2010, 07:33:56 PM »

The bare wire is common ground. It attaches to common on the board. My red wire is attached to middle that's positive / right side  and the black wire is negative / left side.
« Last Edit: February 14, 2010, 08:03:32 PM by kjc625 »
Logged

nwemerys

  • Newbie
  • *
  • Offline Offline
  • Posts: 28
Re: "How To" HK 06 and up Aux Jack to back of radio
« Reply #104 on: February 14, 2010, 11:36:23 AM »

Thanks, that's they way I soldered them.  Today we'll try things out to see if it all works.  Have a great day.
Logged
Dave

94 Nostalgia
07 SE Ultra
     V&H Oval Slip-ons
     sert
     K&N air filter
Pages: 1 ... 5 6 [7] 8 9 ... 13
 

Page created in 0.25 seconds with 25 queries.