Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[LITTERBOX]

Can't see any difference between those....both are spiral louvered 2.25" baffles. The cores look identical, and are the same size.

FUDGE I didn't know that. Thanks for the info...

[LITTERBOX]

Here is the cam specs. Looks to be very close to the GMR577 or Kuryakyn TC-24 D. From what I see the dyno results all seem to be pretty close as well.

 20 / 42 578 Lift 243 Dur at .050

44 / 18 568 Lift 243 Dur at .050

101 Centerline

104 Centerline

[LITTERBOX]

Ok here is what we are doing next. Decided to clip the heads to raise compression to about 10.4-1( he told me exact specs??) , doing a mild port job, putting on a 58mm throttle body and bigger injectors. Guess we will see where it comes out. Not proven but time will tell how it ends up. I do know once we clip the heads this much no going back...
Shooting for 115HP and a 120 lb. of torque with a better/longer torque curve.....

ANY THOUGHTS?

[CVODON]

I am really getting old, been milling heads for 45 years and never knew I was "Clipping" them. Slang....

[LITTERBOX]

I am really getting old, been milling heads for 45 years and never knew I was "Clipping" them. Slang....

Ya I'm old too. CLIP, SHAVE, DECK, MILL, I don't care what you call it. 

[GMR-PERFORMANCE]

ANY THOUGHTS?

yes good luck