www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 ... 22 23 [24] 25 26

Author Topic: Harley 117 Drop on Build in progress  (Read 112091 times)

0 Members and 2 Guests are viewing this topic.

rodrocket

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 159

    • CVO1: 2014 CVO Breakout - Molten Silver / Black Diamond
    • CVO2: 2006 V Rod Destroyer
Re: Harley 117 Drop on Build in progress
« Reply #345 on: March 28, 2016, 07:04:50 PM »
Quote from: GMR-PERFORMANCE on March 28, 2016, 09:06:32 AM
Yes the tire does , its called up sprung weight and the heavier it is the engine has to work harder to turn it.. That is why if you want to be on the ultra light side today is carbon fiber wheels.. Helps in reducing stopping distance as well..  But what you do math on vs what really happens well thats a whole new can of worms as the B engine is not just two heavy counter weights you have chains, two more hyd wear tesiononer shoes plus the long plastic wear strips all drag..

No I cannot hazard a  guess I am sorry but really no way to know until its built.

as for how it measure power simple rate of acceleration from one revolution to the next ..


Thanks for the reply Steve

yes I understand the difference between Sprung & Unsprung weight quite well, check my aviator

what would you suggest for a pipe........

Would the D&D Low cat system work with this or would you suggest a better pipe for the breakout

The thunder header has been suggested but I would be interested in hearing your thoughts

Regards
Rod
Logged

GMR-PERFORMANCE

  • Vendor
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1769
    • TX

Re: Harley 117 Drop on Build in progress
« Reply #346 on: March 28, 2016, 07:14:06 PM »
Yes I saw it not always sure if that is what you do or want to do..  I crew on a car we shook the tires dead out the hole system pulled back timing it hooked we where .0027 off our normal 60 foot went still had a great run , 1/8 mile X275 outlaw.. Some heavy hitter around here way more scratch then I have to spare


 my 62 truck not so fast at this point getting there though. 406 dart engine two guns 4100 stall 4l80e D3 rattle snake trans brake moser 35 spline 9 inch 3.73 gear.. pump gas engine made 901 at the crank on both guns all in .

Way slow compared to most but I like it and its a real driver

T header has never been great they almost always produce a big tq dip down low ,  the DD low cat is something but you are going to need to under stand that it still may not produce the best numbers.. Pipe is a killer of power when things dont match up.. The bagger is a long tube header vs a set of shorty/ mid length headers .
Logged
2012 SHARK  S&S 124 150/140   www.gmrperformance.com

rodrocket

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 159

    • CVO1: 2014 CVO Breakout - Molten Silver / Black Diamond
    • CVO2: 2006 V Rod Destroyer
Re: Harley 117 Drop on Build in progress
« Reply #347 on: March 29, 2016, 12:48:15 AM »
That's some killer numbers Steve, it must be packing some boost :)

Best I have been involved with is 6.96 @ 190.84, this new steed is from your side of the world when KB's owned it & it was raced in the Summit flamed paint scheme, once I have it sorted I will be putting my son in this one.

Is there a better pipe that you would suggest for the Breakout ???
Logged

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3133
Re: Harley 117 Drop on Build in progress
« Reply #348 on: March 29, 2016, 06:01:00 PM »
Steve, go take on the 405, lol
Logged

GMR-PERFORMANCE

  • Vendor
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1769
    • TX

Re: Harley 117 Drop on Build in progress
« Reply #349 on: March 29, 2016, 06:06:09 PM »
Look up the day the crowmod was in denton and see his time slip HA HA  It was the same night
Logged
2012 SHARK  S&S 124 150/140   www.gmrperformance.com

rodrocket

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 159

    • CVO1: 2014 CVO Breakout - Molten Silver / Black Diamond
    • CVO2: 2006 V Rod Destroyer
Re: Harley 117 Drop on Build in progress
« Reply #350 on: April 03, 2016, 01:18:05 AM »
Logged

2BAGGR

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 206
  • Work sucks... Let's ride
Re: Harley 117 Drop on Build in progress
« Reply #351 on: April 04, 2016, 10:45:34 AM »
Awesome build steve.....   Interested to see what changes with Vance and Hines Power Duals, Kury Crushers.
Logged

GMR-PERFORMANCE

  • Vendor
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1769
    • TX

Re: Harley 117 Drop on Build in progress
« Reply #352 on: April 04, 2016, 12:03:30 PM »
turbo car doings it's thing, they are always a big end runner.. If he had not carried the wheels so far he would have been quicker. ton of air under that car slowing him down..  The potential on the stang is huge .. look at the MPH !!!!! He needed that .5 and its all about the little things at that point.. Either way hell of run for both cars.  :2vrolijk_21:
Logged
2012 SHARK  S&S 124 150/140   www.gmrperformance.com

BostonboyDH

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 522

    • CVO1: FLTRSE3
Re: Harley 117 Drop on Build in progress
« Reply #353 on: April 04, 2016, 12:37:13 PM »

  For those following along, my bike left Steve's Thursday night for the long journey back home :2vrolijk_20: The bad news it's been snowing here past two days 4 inches yesterday another 2-4 inches today and the State has plenty of salt on the roads. Wednesday temps in the 50's' rain Thursday and Friday keeping my fingers crossed for Saturday :nixweiss:

BostonBoy
Logged

JoeVibe

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1525
    • TN


    • CVO1: 2022 CVO Road Glide Limited
    • CVO2: 2014 Titanium/Black FLHRSE6
Re: Harley 117 Drop on Build in progress
« Reply #354 on: April 05, 2016, 03:33:51 PM »
Looking forward to your ride report! I talked to Steve and he's starting on mine soon.  :apple:
Logged

FlaHeatWave

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2208

    • CVO1: '01 FXDWG2 RED 103 6sp
    • CVO2: '05 FLHTCSE2 CHERRY
    • CVO3: '09 FLTRSE3 YELLOW 117/DD7
Re: Harley 117 Drop on Build in progress
« Reply #355 on: April 05, 2016, 09:26:53 PM »
Yep, looking forward to the ride report :2vrolijk_21:
Logged
"I've read dozens of books about heros and crooks, and learned much from both of their styles"

BostonboyDH

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 522

    • CVO1: FLTRSE3
Re: Harley 117 Drop on Build in progress
« Reply #356 on: April 06, 2016, 08:17:14 AM »
Quote from: FlaHeatWave on April 05, 2016, 09:26:53 PM
Yep, looking forward to the ride report :2vrolijk_21:

           UPDATE!!! 

    Had to take the day off today, I got a  surprise phone call late yesterday afternoon from Keyboard Carriage, Romeo will be home today around 1pm, only 5 days to deliver him from Steve's  :huepfenjump3:   I was using my garage for storage for the all the chite I had to remove from my rental property which is under agreement for sale. How you end up collecting all this junk when you have two houses I don't know :nixweiss:  but I have to make room today. Still plenty of salt on the roads from the recent snows Sunday & Monday temps around 43 today but some decent rain and warmer temps starting on Thursday with any luck I might get some riding in this weekend !

   BostonBoy
Logged

BostonboyDH

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 522

    • CVO1: FLTRSE3
Re: Harley 117 Drop on Build in progress
« Reply #357 on: April 06, 2016, 08:22:12 AM »
Quote from: JoeVibe on April 05, 2016, 03:33:51 PM
Looking forward to your ride report! I talked to Steve and he's starting on mine soon.  :apple:

   Hey Joe,
 
        With all the reports from the happy fellas runnin their new 117's, I know your itchin!!  I SURE AM!!!!
 
  David
Logged

YELLOWBIRD

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 799
    • VA


    • CVO1: 2009 CVO ROADGLIDE
Re: Harley 117 Drop on Build in progress
« Reply #358 on: April 06, 2016, 08:51:36 AM »

4 Hours 12 minutes, 22 seconds and counting!!!!

And then, ROMEO will have LANDED!

David, you must be going stir crazy!

I can't wait to hear your response.


 :2vrolijk_21: :2vrolijk_21: :2vrolijk_21:


YB

Logged
2009 SCREAMIN' EAGLE CVO ROAD GLIDE FLTRSE3 117" PRO RACE
(1 OF ONLY 369 US) "LAST YEAR OF THE HAND BUILT"

JoeVibe

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1525
    • TN


    • CVO1: 2022 CVO Road Glide Limited
    • CVO2: 2014 Titanium/Black FLHRSE6
Re: Harley 117 Drop on Build in progress
« Reply #359 on: April 06, 2016, 09:59:57 AM »
Quote from: BostonboyDH on April 06, 2016, 08:22:12 AM
   Hey Joe,
 
        With all the reports from the happy fellas runnin their new 117's, I know your itchin!!  I SURE AM!!!!
 
  David

I know what 119/127 feels like in an Ultra, so at 138/138, I know you're gonna have a rocket! Be prepared for unintended wheelies!!

I can't wait to see what Steve does with mine!
« Last Edit: April 06, 2016, 01:54:22 PM by JoeVibe »
Logged
Pages: 1 ... 22 23 [24] 25 26
« previous next »
 

Page created in 0.235 seconds with 20 queries.