Topic: Looking for Recommendations on Head Work (Read 13210 times)

WYD OPN · « **Reply #60 on:** July 07, 2016, 01:39:48 PM »

Quote from: rockytop117 on July 07, 2016, 12:22:07 PM

You don't need larger valves to see flow numbers in that range...

So... You recommend doing the larger intake valves or no?

What flow numbers would be more accurate with headwork and larger valves? 350+cfm? More?

I have a bunch of 110s to do.

Nice numbers from your 117"... 128/136 SAE.

prodrag1320 · « **Reply #61 on:** July 07, 2016, 02:07:34 PM »

getting 335+ with stock intakes (and getting the heads to work at anything but WOT) would be quite a feat.pretty much cause the throat is at 92-93%+all ready,leaving the throat the OEM size,with a bigger valve & a well developed transition & seat will give much more in the streetability dept.our 110 heads with OEM valves are in the 315-320 @ 28" area,pretty much about tops for what we`ve seen from other porters 110 heads that have come thu here

Author Topic: Looking for Recommendations on Head Work (Read 13210 times)

WYD OPN

Re: Looking for Recommendations on Head Work

prodrag1320

Re: Looking for Recommendations on Head Work