I'll only need one set...in chrome......do they work with rear floor boards? They look like they will.
These were designed to suit a 2012 frame so you will need to check if mounting holes are the same on 2013 and later frames.
Yes they will work with rear floor boards but a slight modification will be required.
Bottom bolt will need to be replaced with a countersunk bolt, these holes can be countersunk before Chrome plating.
Standard passengers peg brackets are fixed with one bolt, Two bolts will be required when using rear tie brackets to eliminate axle load on top bolts.
Floor board bracket shown with bottom hole that requires a counter sunk bolt?
Standard foot peg bracket showing bolts required to fix bracket, top bolt will need to be replaced with a bolt 1/4" longer to ensure full thread engagement.