Topic: Newbie has CVO exhaust question (Read 7536 times)

dartman · « **Reply #15 on:** March 05, 2007, 11:45:34 AM »

Pumba I just took some measurements, the inside diameter of the bushing inside the inlet would accommodate a 1.6 Core drill I have seen them 12 to 14 in in length which would cut a perfect hole using the inlet tube for alignment.

Pumba11 · « **Reply #16 on:** March 05, 2007, 11:54:11 AM »

Great thanks. However, where would I find one? Not Home Depot?

dartman · « **Reply #17 on:** March 05, 2007, 12:05:19 PM »

180090548038 check this number on E-Bay its basically what your seeking although the diameter is a little to large, if you can contact the Co maybe they can furnish the correct size, The diamond tipped ones cut through reinforced concrete so the CAT should not be a problem.

Pumba11 · « **Reply #18 on:** March 05, 2007, 12:07:14 PM »

You have been a big help.

Thanks!!!!!!!!

dartman · « **Reply #19 on:** March 05, 2007, 12:10:33 PM »

If your successful let me know might try it myself.

Pumba11 · « **Reply #20 on:** March 05, 2007, 12:12:03 PM »

That number didn't bring up anything on eBay. Any thing else I can try?

dartman · « **Reply #21 on:** March 05, 2007, 12:28:24 PM »

Hi, just checked it worked ok, go to E-Bay Home and cut and paste into the search window, Let me know.

Pumba11 · « **Reply #22 on:** March 05, 2007, 01:39:54 PM »

Works now. Thanks.

dartman · « **Reply #23 on:** March 06, 2007, 08:12:58 AM »

I have an 06 CVO Ultra...those muffs are VERY quiet, in my opinion. Too quiet...and that's on a 103" motor which "kicks" a bit harder than the 88", so they will be even quieter on it. You might get Fulsac to do a conversion on them to open them up a bit, and they would probably sound pretty good. Are you running stock headpipes? If you want an extra pair to send off to Fulsac and have modified, I've got a totally unused pair in a box...

TC, You have me thinking, What would it take to get your pipes into my shop?

Midnight Rider · « **Reply #24 on:** March 06, 2007, 08:57:03 AM »

Quote from: dartman on March 06, 2007, 08:12:58 AM

I have an 06 CVO Ultra...those muffs are VERY quiet, in my opinion. Too quiet...and that's on a 103" motor which "kicks" a bit harder than the 88", so they will be even quieter on it. You might get Fulsac to do a conversion on them to open them up a bit, and they would probably sound pretty good. Are you running stock headpipes? If you want an extra pair to send off to Fulsac and have modified, I've got a totally unused pair in a box...

TC, You have me thinking, What would it take to get your pipes into my shop?

PM me with what you think they're worth...they've never been run on the bike.

Author Topic: Newbie has CVO exhaust question (Read 7536 times)

dartman

Re: Newbie has CVO exhaust question

Pumba11

Re: Newbie has CVO exhaust question

dartman

Re: Newbie has CVO exhaust question

Pumba11

Re: Newbie has CVO exhaust question

dartman

Re: Newbie has CVO exhaust question

Pumba11

Re: Newbie has CVO exhaust question

dartman

Re: Newbie has CVO exhaust question

Pumba11

Re: Newbie has CVO exhaust question

dartman

Re: Newbie has CVO exhaust question

Midnight Rider

Re: Newbie has CVO exhaust question