Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: 14 SERK lifters replacement  (Read 1860 times)

0 Members and 1 Guest are viewing this topic.

Qnn

  • Newbie
  • *
  • Offline Offline
  • Posts: 4
  • www.CVOHARLEY.com

14 SERK lifters replacement
« on: May 21, 2018, 04:20:24 PM »

I have 14 SERK with about 21k miles on it and planning to replace cam bearings, tappets and pushrods with SS products. Just to be sure. Which tappets do you suggest ? Premium with limiters seems to be mostly suggested here, and which pushrods from SS ? HD dealer says that there is difference between 13 and 14 SERK but SS catalogs dont show it. Sorry for my english not my everyday language.
« Last Edit: May 21, 2018, 04:42:06 PM by Qnn »
Logged

fastfreddy

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1654
  • MY CVO
    • IA

    • CVO1: 2013 FLTRXSE traded
    • CVO2: 2016 FLTRUSE
Re: 14 SERK lifters replacement
« Reply #1 on: May 21, 2018, 05:46:45 PM »

my thoughts are you don't need limiters unless you have a cam with over .600 lift, I just replaced mine in the 16 with premium s&s and used stock push rods
Logged
SERGU aka the RENTAL ... never home & always broke...Thnx FF

grc

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 14216
  • AKA Grouchy Old Fart
    • IN


    • CVO1: 2005 SEEG2
Re: 14 SERK lifters replacement
« Reply #2 on: May 21, 2018, 07:33:22 PM »


There is no mechanical difference between the 2013 and 2014 valve train or engines for that matter, the differences between the two model years involve the electrical system (HDLAN or CAN bus being the biggest difference) and things like suspension.  Look up Harley Rushmore for details of those changes.

The regular S&S lifters or the S&S Premiums come highly recommended.  You do not need the ones with travel limiters.

Jerry
Logged
Jerry - 2005 Cherry SEEG  -  Member # 1155

H-D and me  -  a classic love / hate relationship.  Current score:  love 40, hate 50, bewildered 10.

ultra13

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 517
  • www.CVOHARLEY.com
    • OH


    • CVO1: 2013 CVO Ultra
Re: 14 SERK lifters replacement
« Reply #3 on: May 21, 2018, 08:39:51 PM »

Yes....S&S Premiums and stock pushrods...
Logged

KGB

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1241
  • www.CVOHARLEY.com
    • OH


    • CVO1: 2016 FLHXSE Carbon Crystal with Phantom Flames
    • CVO2: 2019 FLHTKSE Magnetic Grey/Wineberry w Red Pepper
Re: 14 SERK lifters replacement
« Reply #4 on: May 21, 2018, 08:42:25 PM »

I used S&S premium with quickie push rods, that way, if I wanted to put a cam in later, I don't have to pull the top end apart, I also thru in rocker lockers.
Logged
2018 MITM Eureka Springs
2018 WV GTG
2018 Maggie Valley GTG
2019 MITM Eureka Springs
2019 Maggie Valley GTG
2020 Maggie Valley GTG
2021 WV GTG
2021 Maggie Valley GTG
2022 Ohio GTG
2023 Maggie Valley GTG

Boatman

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4814
  • FLHRSEI.ORG

    • CVO1: 2014 CVO Limited
    • CVO2: 2010 SEUC-accident victim-gone
    • CVO3: 2005 SEEG-traded on 2010
Re: 14 SERK lifters replacement
« Reply #5 on: May 21, 2018, 11:12:34 PM »

Yes....S&S Premiums and stock pushrods...

X2  as that is what I did at less than 20K on my 2014..  Asked Steve at Fullsac and he does not do adjustables so that was ok with me.  No limiters.  Good luck.
Logged

ultra13

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 517
  • www.CVOHARLEY.com
    • OH


    • CVO1: 2013 CVO Ultra
Re: 14 SERK lifters replacement
« Reply #7 on: May 23, 2018, 04:58:07 PM »

Good choice on the lifters. Replaced mine at 19,000 miles.....Common point of failure it seems.   :2vrolijk_21:
Logged

MCE

  • Guest
Re: 14 SERK lifters replacement
« Reply #8 on: May 30, 2018, 07:30:35 PM »

I like S&S' lifters. Their low-end ones are as good or better than most. Johnson hylift are very good too. fwtw
Logged

Qnn

  • Newbie
  • *
  • Offline Offline
  • Posts: 4
  • www.CVOHARLEY.com

Re: 14 SERK lifters replacement
« Reply #9 on: June 06, 2018, 06:44:11 AM »

Work is done now. Old lifters were OK, no recognizable wear or loose bearing. However, feels good to have them out. Cam bearing were ok also, but swapped anyway. Good thing is that oil pump, chain and tensioner were checked also and all perfect. Those SS time saver pushrods dont need new covers but adjusting is VERY uncomfortable, mechanic with very little girly hands may find it OK :) Local HD dealer  mechanic was very frustrated :D but got it done finally. Engine seems to run a bit quieter. 34k km on the clock.
Logged

J.D.

  • Guest
Re: 14 SERK lifters replacement
« Reply #10 on: June 06, 2018, 07:52:42 AM »

Fueling makes a little pushrod tube holder tool that makes the adjustables easy to install when using the stock pushrod tubes.
Logged
 

Page created in 0.255 seconds with 25 queries.