Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[FUZZY]

Loaded map that says "Rev Xtender enabled" on my 2 bikes & a friends. Still shuts down @ 5500 RPM. What am I doing wrong?

[hd-dude]

Loaded map that says "Rev Xtender enabled" on my 2 bikes & a friends. Still shuts down @ 5500 RPM. What am I doing wrong?

Fuzzy, you need to perform the upgrade to your PCIII. There is a firmware flash to do it. You can purchase it from power commander for $40.00:

http://www.powercommander.com/hdRev.shtml

If you know someone that has the part it can be used countless times on many PCIII's. Or you can go in on it with your friends.

Good luck

[hard10]

Unbalenced will testify to the fact that one needs to have the rev limit extended. It's no fun hitting that rev limiter when you need just a little more out of the engine!!! 

[FUZZY]

Fuzzy, you need to perform the upgrade to your PCIII. There is a firmware flash to do it. You can purchase it from power commander for $40.00:

http://www.powercommander.com/hdRev.shtml

If you know someone that has the part it can be used countless times on many PCIII's. Or you can go in on it with your friends.

Good luck

This is a 2007 model PCIII. I was under the impression it came w/program?

[hd-dude]

It very well may, While the PCIII is connected to your laptop and the PC software running hit Ctrl & F and a dialog box will come up. Check "Extend Redline" and then ok. This will update the PCIII.

 

[FUZZY]

OK. Called PC. I was clicking "add feature" & should have been clicking "OK" instead. Will test this afternoon to confirm limits.

[FUZZY]

Thank you very much for your help!!! 

[FUZZY]

OK. Called PC. I was clicking "add feature" & should have been clicking "OK" instead. Will test this afternoon to confirm limits.

6200!!!!!