Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Phreakyz]

Nice work on the install!

[bigchuck]

Nice job with work and write up. I hope you have better luck with HD speakers than I have.

[BiggDog]

Hi Rivraptor, very nice work on both your high flow intake which I had enjoyed reading earlier and the speaker install. I am going to perform both installs on my 2018 CVO and will let the forum know if the filter clears the speakers on non radiated bikes. If possible I would appreciate it if you could post the actual part numbers associated with the speaker install to avoid potential issues in not ordering the correct parts. Thanks and keep up the excellent posts. Biggdog

[BiggDog]

Greetings all, I am being told by the parts rep that HD will not allow the ECM to be flashed to recognise the additional amp on Road Glides with the 21" front tire?! This follows their claim that the lowers cannot be installed with a 21"tire which has been proven wrong long ago. Please let me know if anyone has successfully completed the lower speaker install on the 2018 CVO with 21"tire including the required flash and if you were told the same story? How did you get around it, apparently the bikes SN is the blocker. Thanks in advance.

[rayson56]

Interesting, maybe try a different dealer who is willing to work with you if they want to sell you the $2500 worth of parts needed to complete your project?

[RivRaptor]

76000660 speaker kit twin cooled lowers
76000277A (or B now) Amp
76000749 Install kit
76000734 Install kit (a new bag-harness hole template & harness cap)

Since 18's don't have radiators you could use the speakers from an 18' CVO SG they are larger in diameter & are more flush mounted hereby negating the possible need to shave the filter element on the heavy breather. Just do a mock up first.